Hi!
I am installing FRED for the first time here. Got so far as to install the latest database fred-db-2.3.2 into pgsql 8.4. Here's the errors I get. Anybody who has seen this before?
...
NOTICE: CREATE TABLE / PRIMARY KEY will create implicit index "request_property_value_pkey" for table "request_property_value"
setval
--------
1406
(1 row)
ERROR: language "plpgsql" does not exist
HINT: Use CREATE LANGUAGE to load the language into the database.
ERROR: language "plpgsql" does not exist
HINT: Use CREATE LANGUAGE to load the language into the database.
ERROR: language "plpgsql" does not exist
HINT: Use CREATE LANGUAGE to load the language into the database.
ERROR: language "plpgsql" does not exist
HINT: Use CREATE LANGUAGE to load the language into the database.
ERROR: language "plpgsql" does not exist
HINT: Use CREATE LANGUAGE to load the language into the database.
ERROR: language "plpgsql" does not exist
HINT: Use CREATE LANGUAGE to load the language into the database.
ERROR: language "plpgsql" does not exist
HINT: Use CREATE LANGUAGE to load the language into the database.
ERROR: language "plpgsql" does not exist
HINT: Use CREATE LANGUAGE to load the language into the database.
ERROR: language "plpgsql" does not exist
HINT: Use CREATE LANGUAGE to load the language into the database.
ERROR: language "plpgsql" does not exist
HINT: Use CREATE LANGUAGE to load the language into the database.
ERROR: language "plpgsql" does not exist
HINT: Use CREATE LANGUAGE to load the language into the database.
ERROR: language "plpgsql" does not exist
HINT: Use CREATE LANGUAGE to load the language into the database.
ERROR: language "plpgsql" does not exist
HINT: Use CREATE LANGUAGE to load the language into the database.
ERROR: language "plpgsql" does not exist
HINT: Use CREATE LANGUAGE to load the language into the database.
ERROR: function tr_request(integer, timestamp without time zone, timestamp without time zone, inet, integer, integer, integer, character varying, boolean) does not exist
LINE 1: ...unction AS ON INSERT TO request DO INSTEAD SELECT tr_request...
^
HINT: No function matches the given name and argument types. You might need to add explicit type casts.
ERROR: function tr_request_data(timestamp without time zone, integer, boolean, integer, text, boolean) does not exist
LINE 1: ...on AS ON INSERT TO request_data DO INSTEAD SELECT tr_request...
^
HINT: No function matches the given name and argument types. You might need to add explicit type casts.
ERROR: function tr_request_property_value(timestamp without time zone, integer, boolean, integer, integer, integer, text, boolean, integer) does not exist
LINE 1: ...NSERT TO request_property_value DO INSTEAD SELECT tr_request...
^
HINT: No function matches the given name and argument types. You might need to add explicit type casts.
ERROR: function tr_session(integer, character varying, timestamp without time zone, timestamp without time zone, character varying) does not exist
LINE 2: DO INSTEAD SELECT tr_session ( NEW.id, NEW.name, NEW.login_d...
^
HINT: No function matches the given name and argument types. You might need to add explicit type casts.
ERROR: language "plpgsql" does not exist
HINT: Use CREATE LANGUAGE to load the language into the database.
ERROR: language "plpgsql" does not exist
HINT: Use CREATE LANGUAGE to load the language into the database.
Hello,
I was wondering when domain expires, and leaves behind contact and
nssets, are they deleted after some time?
Is there any messages email/epp generated to registrar on these events ?
--
Georg Kahest
Süsteemiadministraator
Eesti Interneti SA • Silikaltsiidi 3a, 11216 Tallinn
Tel 727 1016 • Faks 727 1010 • Mobiil 58 50 35 64
www.eestiinternet.ee
Hello,
We have a problem with domain deletion and I will try to describe our
problem.
Domain expired at 2010-10-08 and an expiration registration protection
came to an end (in our system it is set to 90 days). After this period
FRED for an epp query:
<?xml version="1.0" encoding="UTF-8"?>
<epp xmlns="urn:ietf:params:xml:ns:epp-1.0"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
xsi:schemaLocation="urn:ietf:params:xml:ns:epp-1.0 epp-1.0.xsd">
<command>
<poll op="req"/>
<clTRID>1293530719893#17</clTRID>
</command>
</epp>
should generate an epp response similar to the one below:
<?xml version="1.0" encoding="UTF-8"?>
<epp xmlns="urn:ietf:params:xml:ns:epp-1.0"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
xsi:schemaLocation="urn:ietf:params:xml:ns:epp-1.0 epp-1.0.xsd"><response>
<result code="1301">
<msg>Command completed successfully; ack to dequeue</msg>
</result>
<msgQ count="40" id="3296">
<qDate>2010-12-23T02:30:01+01:00</qDate>
<msg>
<domain:delData
xmlns:domain="http://www.nic.cz/xml/epp/domain-1.3"
xsi:schemaLocation="http://www.nic.cz/xml/epp/domain-1.3 domain-1.3.xsd">
<domain:name>mytestdomain.xy.zv</domain:name> <<<< this is the
most important part of the message for me
<domain:exDate>2010-09-23</domain:exDate>
</domain:delData>
</msg>
</msgQ>
<trID><clTRID>1293530719893#17</clTRID><svTRID>ccReg-0000485086</svTRID></trID>
</response>
</epp>
In most cases it worked fine and there were no problems with this, but
sometimes it looks like that the response containing information about
domain deletion had not been generated and it is a big problem for us.
I had looked at the FRED database and I found an action_xml table which
contains all conversations between FRED and a software which
communicates with it by epp protocol. Searching performed on this table
gave no satisfied results.
Is it possible that in case of:
* hardware problems
* system restart
* unexpected service stopped
or any other unpredictable reason, a queue which contains information
about event such as domain deletion is being cleaned and there is no way
to restore these information?
Does the queue is stored only in memory or it is persisted on filesystem
or in db?
Does an epp request with command op='req' is the only way to get an
information about domain deletion or there are some other ways to obtain
this kind of information?
Thanks and best regards.
Michal Pochwala
Hello,
I am new on FRED, have been trying to install it after using its live cd.
I have followed instructions given on
http://fred.nic.cz/attachment/wiki/documentation/notasfredj-en.pdf,
apache2 and fred-server started without a hitch, but when I tried to run
fred-client it could not connect to port 700, yes the server is listening
on port 700 set from
/etc/apache2/sites-enabled/02-fred-mod-eppd-apache.conf.
Below are the error messages in /var/log/fred-eppd.log when I run
fred-client
[Mon Jan 17 16:26:43 2011] [error] [client 127.0.0.1] mod_corba: Could not
obtain reference of object 'EPP':
IDL:omg.org/CosNaming/NamingContext/NotFound:1.0.
[Mon Jan 17 16:26:43 2011] [error] [client 127.0.0.1] mod_corba: Could not
obtain reference of object 'EPP':
IDL:omg.org/CosNaming/NamingContext/NotFound:1.0.
[Mon Jan 17 16:26:43 2011] [error] [client 127.0.0.1] mod_corba: Could not
obtain reference of object 'EPP':
IDL:omg.org/CosNaming/NamingContext/NotFound:1.0.
[Mon Jan 17 16:26:43 2011] [error] [client 127.0.0.1] mod_corba: Could not
obtain reference neither from cache nor nameservice.
[Mon Jan 17 16:26:43 2011] [error] [client 127.0.0.1] mod_corba: Could not
obtain reference of object 'EPP':
IDL:omg.org/CosNaming/NamingContext/NotFound:1.0.
[Mon Jan 17 16:26:43 2011] [error] [client 127.0.0.1] mod_corba: Could not
obtain reference of object 'EPP':
IDL:omg.org/CosNaming/NamingContext/NotFound:1.0.
[Mon Jan 17 16:26:43 2011] [error] [client 127.0.0.1] mod_corba: Could not
obtain reference of object 'EPP':
IDL:omg.org/CosNaming/NamingContext/NotFound:1.0.
[Mon Jan 17 16:26:43 2011] [error] [client 127.0.0.1] mod_corba: Could not
obtain reference neither from cache nor nameservice.
The service omniorb4-nameserver is started as well.
I'd appreciate any help in solving this as well as any guidance is setting
up fred-webadmin as it is not included in the document.
Thanks
Christian
Hello folks,
I wanted to know if you had already seen this kind of error and if It might have a negative impact on our EPP operations ?
Thanks for your support.
[28/Jan/2011:17:28:09 +0100] 8.9.26.12 [sessionID 430210] Logged in successfully, login id is 1682
[28/Jan/2011:17:33:10 +0100] 8.9.26.12 [sessionID 430210] Error when reading epp header (70007 - The timeout specified has expired)
[28/Jan/2011:17:33:10 +0100] 8.9.26.12 [sessionID 430210] Session ended
––––––––––––––––––––––––––––––––––––––––––––––
---------> Grégory Bernard Director <---------
---------------> www.osnet.eu <---------------
--> Your provider of OpenSource appliances <--
––––––––––––––––––––––––––––––––––––––––––––––
OSnetOSnetOSnetOSnetOSnetOSnetOSnetOSnetOSnetO
Hello,
I need an urgent help.
I have been trying to add credit to my registrar
fred-banking --credit REG-XXXX co.tz 100000
The credit is not added and If i go to see the logs I see something very strange...It starts well by checking the enum_action and found 43 rows but then it goes to
execute the following query and here its where problem starts....
SELECT
r.id,r.handle,r.name,r.url,r.organization,r.street1,r.street2,r.street3,r.city,r.stateorprovince,r.postalcode,r.country,r.telephone,r.fax,r.email,r.system,
COALESCE(SUM(i.credit),0) FROM registrar r LEFT JOIN invoice i ON (r.id=i.registrarid AND
NOT(i.credit ISNULL)) WHERE 1=1 AND r.handle='wwwnetbanking.tz' GROUP BY
r.id,r.handle,r.name,r.url,r.organization,r.street1,r.street2,r.street3,r.city,r.stateorprovince,r.postalcode,r.country,r.telephone,r.fax,r.email,r.system
ORDER BY r.id
Now I noticed in the query there is r.handle='wwwnetbanking.tz' which is not in my registrars list and thus no result is found
I expected r.handle to be REG-XXXX mentioned above and not the one listed and it is coming into the query as the value and parameter and
moreover if i run the same command to add the same registrar same amount of money what happens is that it execute the same query but
r.handle='wwwnetbanking.tz' changes to say r.handle='netbankomng.tz'
I am confused and run out of ideas.Can you have an idea and why this
sudden change?
--
Regards,
Bryton.
