26 Kvě
2013
26 Kvě
'13
23:23
hi again,
i've done as you said but when i run fred-client i get an authentication
error allthough i'm putting the right username and passwd in
fred-client.conf
root@nic0:~# fred-client -f /etc/fred/fred-client.conf
Czech translation not available
FredClient upstream/2.6.0.rc1-92-g7aa8
Type "help", "license" or "credits" for more information.
Using configuration from /etc/fred/fred-client.conf
Connecting to localhost, port 700 ...
ERROR: Login failed.
here's my fred-client.conf:
;; Example of configuration file.
;; Modify line with schema=... and dir=... set real path of your files.
;; and save into /etc/fred/fred-client.conf or ~/.fred-client.conf
;; EXPLANATION: Double semicolon (;;) means comment. Single semicolon (;)
means disabled value.
[connect]
dir=/usr/share/fred-client/ssl
host = localhost
port = 700
ssl_cert = %(dir)s/test-cert.pem
ssl_key = %(dir)s/test-key.pem
#username = REG-FRED_A
#password = passwd
#username2 = REG-FRED_B
#password2 = passwd
username = NIC-REG1
password = passwd
;; Every XML namespace can have the version independent to others:
;schema_version_contact = 1.4
;schema_version_nsset = 1.2
;schema_version_domain = 1.3
;schema_version_enum = 1.1
;schema_version_fred = 1.2
;schema_version_epp = 1.0
;; socket timeout in sec. In MS Windows MUST be set to 0.0 (timeout bug)
timeout = 10.0
;; Force socket type. Valid value is: IPv4 or IPv6.
;; Default is to use server's socket type.
;socket = IPv6
;; turn off automatic login process after start up
;nologin = y
[session]
schema=/usr/share/fred-client/schemas/all.xsd
;; send "poll ack" right after to "poll req"
poll_autoack = off
;; confirm all editable commands
confirm_send_commands = on
;; enable/disable xmllint
validate = on
;; display colors on tty console
colors = on
;; if your input is escaped ('<example&test>'), set this
value on
escaped_input = on
;; set verbose level 1,2,3
verbose = 1
;; if lang is not set, it used value from os.environ.LANG
;; lang = cs
lang = en
;; substitution of NULL value
;null_value = None
;; substitution of SKIP value
;skip_value = None
;; cltrID - client transaction ID for all communication
;; Symbol %d is replaced by number of the command.
;; Value 04 between % and d pads all numbers to four digits (leading zero).
; cltrid = myid%04d
;; Reconnect automaticly if connection fell down (default yes)
; reconnect = no
what could it be?
thanks,
Samer
On Sun, May 12, 2013 at 12:08 AM, Mario Guerra <mguerra(a)nic.cr> wrote:
On Sat, 11 May 2013 21:59:39 +0300
samer khalil <samerk1(a)gmail.com> wrote:
hi Mario,
I was able to initiate the db and add a registrar with a zone as u
suggested. i used:
fred-admin --registrar_add --handle=NIC-REG1 --country=LB --no_vat
fred-admin --zone_add --zone_fqdn=test.lb --ex_period_min=1
--ex_period_max=241 --hostmaster=samerk1.gmail.com
--ns_fqdn=nic0.net.lb--refresh=1800
fred-admin --zone_ns_add --zone_fqdn=test.lb
--ns_fqdn=nic0.net.lb--addr=147.28.0.44
Now what's next? I am looking for a good documentation for
Fred Administration and user guide. Do you have any to share?
thanks,
Same
Almost done. Associate the zone with the registrar:
registrar_add_zone options:
--registrar_add_zone add access right for registrar to zone
--zone_fqdn arg zone fqdn
--handle arg registrar handle
--from_date arg from date (default today)
--to_date arg to date (default not filled)
Like:
fred-admin --registrar_add_zone --zone_fqdn test.lb --handle NIC-REG1
After that, you are supposed to use fred-client.
On Thu, May 9, 2013 at 1:07 AM, Mario Guerra <mguerra(a)nic.cr> wrote:
> On Wed, 8 May 2013 23:51:50 +0300
> samer khalil <samerk1(a)gmail.com> wrote:
>
> > Hi,
> > I am new to this list and would like to install a test environment of
> Fred
> > and eventually have it operational for our TLD registry in Lebanon
(.LB).
> > I am seeking your assistance and
guidance in order to proceed with
the
> > installation.
> > I am working on ubuntu 12 and so far i have installed the following
fred
> > packages:
> >
> > ii fred-adifd 2.13.5~rc1-1~precise+1
> > FRED Administration Interface Daemon
> > ii fred-client 2.6.0~rc1-1ubuntu3~precise+1
> > FRED client for registrars, text interface
> > ii fred-client-qt4 2.6.0~rc1-1ubuntu3~precise+1
> > FRED client for registrars, GUI interface
> > ii fred-common 2.14.0~rc7-1~precise+1
> > FRED common files
> > ii fred-db 2.13.0~rc3-1~precise+1
> > DB schema and example data for FRED
> > ii fred-doc2pdf 2.5.1~rc1-2ubuntu2~precise+1
> > PDF generator for FRED registry system
> > ii fred-idl 2.14.0~rc1-1~precise+1
> > IDL files for FRED
> > ii fred-logd 2.13.5~rc1-1~precise+1
> > FRED logging daemon
> > ii fred-mifd 2.13.5~rc1-1~precise+1
> > FRED backend for MojeID
> > ii fred-msgd 2.13.5~rc1-1~precise+1
> > FRED messaging daemon
> > ii fred-pifd 2.13.5~rc1-1~precise+1
> > FRED Public Interface Daemon
> > ii fred-pyfred 2.4.2~rc2-1~precise+1
> > FRED Support Daemons
> > ii fred-pylogger 1.2.0~rc1-1ubuntu1~precise+1
> > Python wrapper for logging to FRED logger
> > ii fred-rifd 2.13.5~rc1-1~precise+1
> > FRED Registrar Interface Daemon
> > ii fred-stats 1.2.2~rc1-1~precise+1
> > FRED is complete central domain registry
> > ii fred-transproc 1.2.0-1~precise+1
> > FRED support for importing bank statements
> > ii fred-webadmin 3.10.0~rc1-1ubuntu4~precise+1
> > www administration interface for FRED
> > ii fred-whois 2.11.0-1ubuntu1~precise+1
> > Web Whois interface for FRED registry system
> > ii nagios-pyfred-genzone-plugin 2.4.2~rc2-1~precise+1
> > Nagios plugin to FRED Zone Generator
> > ii pyfred-filemanager 2.4.2~rc2-1~precise+1
> > FRED File Manager Client
> > ii pyfred-genzone 2.4.2~rc2-1~precise+1
> > FRED Zone Generator Client
> >
> > Apache, postgres, python, corba are installed as well.
> > I loaded the sql database from /usr/share/fred-db/structure.sql
> >
> > I am stuck at this level and would appreciate your help to proceed.
> >
> > Regards,
> > Samer
>
> Hello, Samer:
>
> Run:
>
> su - postgres
> /usr/sbin/fred-dbmanager install
> exit
>
> This setup the database "fred" and the tables. After that, add a
> registrar, then add one or more zones and associate them with the
registrar.
>
> Best regards.
>
> --
> Mario Guerra <mguerra(a)nic.cr>
> _______________________________________________
> fred-users mailing list
> fred-users(a)lists.nic.cz
> https://lists.nic.cz/cgi-bin/mailman/listinfo/fred-users
>
--
Mario Guerra <mguerra(a)nic.cr>
_______________________________________________
fred-users mailing list
fred-users(a)lists.nic.cz
https://lists.nic.cz/cgi-bin/mailman/listinfo/fred-users