Hi,
We would like to run an ENUM registry for several companies to use to
provide lookups for their customers. The registry would store the
service provider gateway addresses.
I would like to ask a couple of questions.
We have been introduced to the Austrian ENUM server software, but it
appears to be very hard to install and does not support ubuntu server.
Does FRED do the same things as the Austrian software?
We found during a test that Cisco devices do not support the latest ENUM
RFC and we had to use an ENUM proxy to translate back to the old RFC.
Does FRED overcome this issue with Cisco gateway ENUM lookups?
We want to use a private domain for the registrations: domain.com
Does Fred permit the use of a private domain tree or must we use
e164.arpa?
Regards
mark
We would like to separate files for different subzones. Two possible
strategies:
1. Some option from genzone_client using an only zone.
2. Defining zones in FRED .cr, .ac.cr, .co.cr and the like (notice the
second-level zone).
Any thoughts?.
Best regards.
FRED installation using Ubuntu 9.04 (Jaunty) is very similar to an 8.04
installation.
There was one problem, though, with tinyerp-server, it fails. I
apparently solved that with this trick:
cp /usr/lib/python2.6/dist-packages/oldxml/_xmlplus/utils/boolean.so
/usr/lib/python2.6/dist-packages/_xmlplus/utils/
So it seems that everything is OK now.
BTW, I guess that future versions will use OpenERP which is TinyERP
succesor.....
Best regards.
in Fred there is a Whois service at this address:
http://localhost/whois
I would like to use this one on our website.
How/where can i edit the design of this page (content, fonts, fields etc.) ?
regards
Petur
This email and its attachments may be confidential and are intended solely for the use of the individual to whom it is addressed.
If you are not the intended recipient or authorized to receive information for the intended recipient you are notified that disclosing, copying, distributing or taking any action in reliance on the contents of this information is strictly prohibited. If the email contains proposals, they are valid for 30 days following the date of email transmission. Finally, the recipient should check this email and any attachment for the presence of viruses. The company accepts no liability for any damage caused by any virus transmitted by email.
Hello
On DEBIAN:
I sorry I came in the morning and want to connect with fred-client.
It turn back error:
> login REG-FRED_A passwd
Used socket type: IPv4.
Socket timeout: 10.0 sec.
Connecting to localhost, port 700 ...
Connection established.
Try to open SSL layer...
ERROR: I cannot connect to the server localhost.
Connection socket.error: (111, 'Connection refused') (localhost:700)
It worked normally yesterday.
On UBUNTU:
I have these errors when trying to run fred-client :
d# /usr/local/bin/fred-client
FredClient 2.1.2
Type "help", "license" or "credits" for more information.
Using configuration from /root/.fred-client.conf
Used socket type: IPv4.
Socket timeout: 10.0 sec.
Connecting to localhost, port 700 ...
Connection established.
Try to open SSL layer...
ERROR: socket.sslerror: (1, 'error:140770FC:SSL routines:SSL23_GET_SERVER_HELLO:unknown protocol') (localhost:700)
Certificate not signed by verified certificate authority.
Hello
I've all servers runing on DEBIAN but I can't login with the default registrars :
root@nic:/home/nic# /usr/local/bin/fred-client
FredClient 2.1.2
Type "help", "license" or "credits" for more information.
Using configuration from /usr/local/etc/fred/fred-client.conf
> login REG-FRED_A passwd
Used socket type: IPv4.
Socket timeout: 10.0 sec.
Connecting to localhost, port 700 ...
Connection established.
Try to open SSL layer...
ERROR: I cannot connect to the server localhost.
Connection socket.error: (111, 'Connection refused') (localhost:700)
Hello sir
I very much sorry
You wrote to me :
"Sorry, but I don't understand what configure script you are trying to
call. If you will install omniorb normal way (apt-get install omniidl4
omniidl4-python libomniorb4-dev libomnithread3-dev', you should not have
aby such problems."
I've install all mentioned on M GUERRA before install FRED.
Do you remember when I had problem with fred-pyfred (witch not started) on DEBIAN and when I used fred-manager for install.
I had solved this with installing omniORBpy and fred-pyfred started.
So I think that I can solve this same problem on Ubuntu with omniORBpy installation.
Only fred-pyfred server don't start on UBUNTU.
On DEBIAN I have to delete FRED database for restarting servers otherwise it stop on PostgreSQL interface.
hello sir I´m sorry again
I´ve install FRED on Ubuntu server 8.04
Only fred-pyfred server don´t start I´ve solve this in Debian by installing omniORBpy but on Ubuntu
it sent back went I execute configure command:
configure error : You must specify the omniORB root directory
it´s withoption --with-omniorb but I have try the directories.
/usr/share/pyshared/omniORB,
/usr/lib/python2.5/sitres-packages/onmiORB.
but it don´t works.
I´ve already install omniORb-4.1.3
I´ve copy fred-server in /etc/init.d/ and do update-rc.d fred-server defaults.
Servers didn´t start when I reboot the computer, I have always to start them manualy.
REG-FO@localhost> poll req
Command completed successfully; ack to dequeue
Queue size: 1
Message ID: 142
Message date: 2009-05-04T16:16:19+01:00
Message content:
[nsset:testData]:
[ATTR: xmlns:nsset: http://www.nic.cz/xml/epp/nsset-1.2; xsi:schemaLocation: http://www.nic.cz/xml/epp/nsset-1.2 nsset-1.2.xsd]
[nsset:id]: NS437
[nsset:name]: 'olivant.fo'
[nsset:result]:
[nsset:testname]: glue_ok
[nsset:status]: false
Above you can see my problem.
My question is:
How do i register glue-records with FRED ?
The domain above uses nameservers ns1.olivant.fo and ns2.olivant.fo for the domain olivant.fo
regards
Petur
This email and its attachments may be confidential and are intended solely for the use of the individual to whom it is addressed.
If you are not the intended recipient or authorized to receive information for the intended recipient you are notified that disclosing, copying, distributing or taking any action in reliance on the contents of this information is strictly prohibited. If the email contains proposals, they are valid for 30 days following the date of email transmission. Finally, the recipient should check this email and any attachment for the presence of viruses. The company accepts no liability for any damage caused by any virus transmitted by email.
When i use the poll req command, i get this result:
Queue size [msgQ.count]: 1
Message ID [msgQ.id]: 143
Message date [qDate]: 2009-05-04T18:22:14+01:00
Message content [msg]:
[nsset:testData]:
[ATTR: xmlns:nsset: http://www.nic.cz/xml/epp/nsset-1.2; xsi:schemaLocation: http://www.nic.cz/xml/epp/nsset-1.2 nsset-1.2.xsd]
[nsset:id]: NS437
[nsset:name]: 'balslev.fo'
[nsset:result]:
[nsset:testname]: glue_ok
[nsset:status]: true
[nsset:testname]: existence
[nsset:status]: true
[nsset:testname]: presence
[nsset:status]: true
[nsset:testname]: authoritative
[nsset:status]: true
But how can i access for example [nsset:status] programmatically. I have tried my best, but i dont know how to do it. Im using PHP. I thought it should be something like:
$fred_data['msg'][nsset:status][0]
But i cant find out the right syntax.
This email and its attachments may be confidential and are intended solely for the use of the individual to whom it is addressed.
If you are not the intended recipient or authorized to receive information for the intended recipient you are notified that disclosing, copying, distributing or taking any action in reliance on the contents of this information is strictly prohibited. If the email contains proposals, they are valid for 30 days following the date of email transmission. Finally, the recipient should check this email and any attachment for the presence of viruses. The company accepts no liability for any damage caused by any virus transmitted by email.
Salut
Bon je voulais installer omniORBpy-3.3 sur UBUNTU server 8.04
Mais si j´execute la commande configure il me renvoie:
configure errror: You must specify the omniORB root directory
Je sais que c´est l´option --with-omniorb qu´il faud utiliser mais quel repertoire donner.
J´ai essayé : /usr/share/pyshared/omniORB,
/usr/lib/python2.5/sitres-packages/onmiORB.
Mais ca passe pas
Y´a-t-il une librairie à installer avant d´installer omniORBpy ou non ?
J´ai dèjà installé omniORb-4.1.3
I want install omniORBpy-3.3 on ubuntu server
When I do ./configure it say:
checking for omniORM root ... no
configure: error :You must specify the omniORB root directory
how to specify it ?
when I do find -name omniORB I have:
/usr/share/pyshare/omniORB
/usr/lib/python2.5/site-packages/omniORB
/home/fred/fred-tools/omniORBpy-3.3/python/omniORB
witch ake as root directory ?
We are now testing FRED in earnest and adapting our web application to it.
We would like to massively delete test contacts without waiting for the
protection period. How could that be done short of making a backup of
the BD first and then restoring?.
BTW, how can I change the protection period?.
Best regards.
Mario Guerra
I configured the latest FRED for the upcoming Ubuntu 9.04. Basically the
same than FRED for Hardy. One strange thing, though.
tinyerp-server does not install well. Not a FRED problem, but a
packaging or so problem when generating the corresponding .deb. I filed
a Launchpad bug and got the former tinyerp-server (for Hardy).
I documented the process. I'm sending the translated version to Jaromír
in these days.
Saludos.
I have 2 questions about fred-client command "technical_test".
In the documentation i read this:
"The result of the test will be saved into the message queue from where the registrant can fetch it by poll command."
My questions are:
1) Is the result of the test also saved in some of the postgresql tables ?
2) If the result isnt saved in the database, and i cant check the result from the database, then how do i use the poll command to see the result ?
regards
Petur
This email and its attachments may be confidential and are intended solely for the use of the individual to whom it is addressed.
If you are not the intended recipient or authorized to receive information for the intended recipient you are notified that disclosing, copying, distributing or taking any action in reliance on the contents of this information is strictly prohibited. If the email contains proposals, they are valid for 30 days following the date of email transmission. Finally, the recipient should check this email and any attachment for the presence of viruses. The company accepts no liability for any damage caused by any virus transmitted by email.
Hello folks,
We would need to update the removal period from 15 days to 2 months -
this corresponds more to our concerns.
By diggin into the configuration we foud that data was storred in the
DB and that executing this command should do the trick:
update enum_parameters set val = '60' where id = 6;
Can you please confirm that?
Do we have any more action to take?
Thanks for your support.
¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯
Gregober ---> PGP ID --> 0x1BA3C2FD
bsd @at@ todoo.biz
¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯
P "Please consider your environmental responsibility before printing
this e-mail"
Hi.
I am trying to Install FRED but I am having many problems.
I tried the way:
./fred-manager download
./fred-manager install
./fred-manager start
and it gets the errors below:
root@ns1:~/test# ./fred-manager install
initdb: cannot be run as root
Please log in (using, e.g., "su") as the (unprivileged) user that will
own the server process.
checking for a BSD-compatible install... /usr/bin/install -c
checking whether build environment is sane... yes
checking for a thread-safe mkdir -p... /bin/mkdir -p
checking for gawk... no
checking for mawk... mawk
checking whether make sets $(MAKE)... yes
checking for a sed that does not truncate output... /bin/sed
checking for /home/sysdns/test/root/nofred/pg... no
configure: error: Directory "/home/sysdns/test/root/nofred/pg" does not exists (use --with-pghbadir)
Than I have used the other options, by adding the following source in the source.lists
deb http://archive.nic.cz/ dapper/
Than when I do apt-get install fred-* it shows the line below:
root@ns1:~/test# apt-get install fred-*
Reading package lists... Done
Building dependency tree
Reading state information... Done
E: Couldn't find package fred-manager
Can someone help in the process for Installing fred because I think I am stuck and I don't know what to do??
Thanks a lot
Adriatik
In our system (regarding Contacts) we need 2 fields:
Nationality
Country
but FRED only uses Country.
Is there any place to save both these informations ?
(This is not very important to me, i also send this as information.)
regards
Petur
This email and its attachments may be confidential and are intended solely for the use of the individual to whom it is addressed.
If you are not the intended recipient or authorized to receive information for the intended recipient you are notified that disclosing, copying, distributing or taking any action in reliance on the contents of this information is strictly prohibited. If the email contains proposals, they are valid for 30 days following the date of email transmission. Finally, the recipient should check this email and any attachment for the presence of viruses. The company accepts no liability for any damage caused by any virus transmitted by email.
hello
1--I´ve finished to install FRED on DEBIAN 5.0 with downloadind and compiling sources as at download page
But when I want to start servers with ./fred-server start it take away to postgres interface and stay there:
postgres#
2--Also fred-dbmanager execution took to the postgres interface
3--I´ve create FRED database and use ordered.sql to create tables
and when I do ./fred-dbmanager it say fFRED database don´t exist or postgres server isn´t running
Or postgres is online and I have create the database
can you give help to pass this step ?
I have put my documentation notes about installing FRED in
http://www.guerra.co.cr/FRED/notasfredj-en.pdf
Please feel free to comment about them.
I hope this is useful.
Regards.
Mario A. Guerra
NIC - Costa Rica
REG-FO@localhost> renew_domain hus.fo 2009-12-04 (6 m)
Do you really want to send this command to the server? (y/N): y
ERROR: Parameter value policy error
Reason: period is not aligned with allowed step.
Is it possible to allow this ? and how ?
This email and its attachments may be confidential and are intended solely for the use of the individual to whom it is addressed.
If you are not the intended recipient or authorized to receive information for the intended recipient you are notified that disclosing, copying, distributing or taking any action in reliance on the contents of this information is strictly prohibited. If the email contains proposals, they are valid for 30 days following the date of email transmission. Finally, the recipient should check this email and any attachment for the presence of viruses. The company accepts no liability for any damage caused by any virus transmitted by email.
Hello sir
I'me testing FRED. With administrative
interface I've create a registrar I can search it but when I verify the
table registrar in databse I don't see it. Why ?
When I execute creation commands, after typing command conection "fred-client -h nic -p 22353 -u REG-FRED_A -w passwd, in console"
It sent after I fill up fields :
Interactive input completed. [Press Enter]
I press ENTER
It sent back error like :
You are not connected.
ERROR: Command data XML document failed to validate.
More details in verbose 2 or higher.
If I open ./nofred/named/cron.log there is line error:
File "/home/nic/root/lib/python2.5/site-packages/pyfred/zone.py",
line 174, in getObject
raise ZoneException("Is nameservice running? (%s)" % e)
pyfred.zone.ZoneException: Is nameservice running? (CORBA.TRANSIENT(omniORB.TRANSIENT_ConnectFailed, CORBA.COMPLETED_NO))
T
Is this the problem ?
have I to modify some configuration files ?
how to connect for executing commands (creating contact, registrar, domaine.... etc) ?
thank you
Hello everybody;
I want to install Fred on Fedora 8. I followed instructions found on
nic.cz in intalling fred-repo and trying yum install fred-*. But, that
command installed only fred-db instead the whole package. Can somebody
help me to fix the problem? Thank you in advance for your help.
Best regards.
--
This message has been scanned for viruses and
dangerous content by MailScanner, and is
believed to be clean.
Hello sir
I had problem for runing fred-pyfred server it said "cannot import name pgdb".
Following M GUERRA's instruction by installing python-pygresql it say:
"cannot import name ccReg".
you can give help ?
thank you
hello sir
I have finished to install FRED but fred-pyfred server don't start .
when I do fred-server status I have :
fred-pyfred is stopped
fred-rifd is running
fred-pifd is running
fred-adifd is running
And when I do fred-pyfred start it send back :
Traceback (most recent call last):
File "./root/bin/fred-pyfred", line 13, in <module>
import pgdb
ImportError: No module named pgdb
Have you a solution for this ?
thank you
--- En date de : Mer 1.4.09, fred-users-request(a)lists.nic.cz <fred-users-request(a)lists.nic.cz> a écrit :
De: fred-users-request(a)lists.nic.cz <fred-users-request(a)lists.nic.cz>
Objet: Fred-users Digest, Vol 10, Issue 1
À: fred-users(a)lists.nic.cz
Date: Mercredi 1 Avril 2009, 12h00
Send Fred-users mailing list submissions to
fred-users(a)lists.nic.cz
To subscribe or unsubscribe via the World Wide Web, visit
https://lists.nic.cz/mailman/listinfo/fred-users
or, via email, send a message with subject or body 'help' to
fred-users-request(a)lists.nic.cz
You can reach the person managing the list at
fred-users-owner(a)lists.nic.cz
When replying, please edit your Subject line so it is more specific
than "Re: Contents of Fred-users digest..."
Today's Topics:
1. installing FRED (Adriatik Allamani)
----------------------------------------------------------------------
Message: 1
Date: Tue, 31 Mar 2009 12:43:25 +0200
From: Adriatik Allamani <adriatik.allamani(a)akep.gov.al>
Subject: installing FRED
To: Fred-List <fred-users(a)lists.nic.cz>
Message-ID: <1238496205.6065.16.camel@aallamani>
Content-Type: text/plain; charset="us-ascii"
Hi.
I am trying to Install FRED but I am having many problems.
I tried the way:
../fred-manager download
../fred-manager install
../fred-manager start
and it gets the errors below:
root@ns1:~/test# ./fred-manager install
initdb: cannot be run as root
Please log in (using, e.g., "su") as the (unprivileged) user that will
own the server process.
checking for a BSD-compatible install... /usr/bin/install -c
checking whether build environment is sane... yes
checking for a thread-safe mkdir -p... /bin/mkdir -p
checking for gawk... no
checking for mawk... mawk
checking whether make sets $(MAKE)... yes
checking for a sed that does not truncate output... /bin/sed
checking for /home/sysdns/test/root/nofred/pg... no
configure: error: Directory "/home/sysdns/test/root/nofred/pg" does not exists (use --with-pghbadir)
Than I have used the other options, by adding the following source in the source.lists
You have not to be connected as root but simple user as user@ns1~/test$
type exit then run ./fred-manager install
deb http://archive.nic.cz/ dapper/
Than when I do apt-get install fred-* it shows the line below:
root@ns1:~/test# apt-get install fred-*
Reading package lists... Done
Building dependency tree
Reading state information... Done
E: Couldn't find package fred-manager
Can someone help in the process for Installing fred because I think I am stuck and I don't know what to do??
Thanks a lot
Adriatik
hello
when I try to start FRED servers, they don't and when I try:
$/root/bin/fred-pyfred start
Importing modules ['mailer', 'techcheck', 'filemanager', 'genzone']
Could not import module: cannot import name ccReg
Is this the reason that servers don't start? How to solve this ?
And when I'm in /share/idl/fred and do ls command I have :
_Admin.idl ccReg.idl EPP.idl Filters.idl _Registry.idl _Whois.idl ZoneGenerator.idl
Admin.idl _dataTypes.idl _FileManager.idl _Mailer.idl _TechCheck.idl Whois.idl _zone.idl
_EPP.idl FileManager.idl Mailer.idl TechCheck.idl _ZoneGenerator.idl
but not _ccReg.idl like EPP.idl _EPP.idl; Admin.idl _Admin.idl ...etc
Hello sir
I have read in the FRED archives for starting FRED servers I have to type the command:
nic@nicGest:~$ /etc/init.d/fred-server start
Starting FRED central registry CORBA servers....
And after I verify if servers were started :
nic@nicGest:~$ /etc/init.d/fred-server status
fred-pyfred is stopped
fred-rifd is stopped
fred-pifd is stopped
fred-adifd is stopped
I don't know why servers don't start ?
Then I thing that this is the reason of connection errors when I type command to start fred-client :
nic@nicGest:~/ etc/fred/fred-client.conf
Connecting to localhost, port 22351 ...
ERROR: I cannot connect to the server localhost.
Connection socket.error: (111, 'Connection refused') (localhost:22351)
How to start the FRED servers ?
How to solve connection errors ?
Hello sir
I want to create my first registrar and zone. I use the scripts in the "HOW TO" witch I copy in two file: registrar.sh and zone.sh. And when I run command "sh registrar.sh" I have no error but any change is not done on tables registrar and registraracl.
Is it those step are obsolete or not (for creating registrar and zone) ?
What I have to do to create the first registrar and zone ?
Hello sir
When I run /home/nic/root/bin/fred-client I receive at first:
FredClient 2.1.2
Type "help", "license" or "credits" for more information.
Using configuration from /home/nic/root/etc/fred/fred-client.conf
ERROR: Can't connect to server
SSL certificate file not found
SSL private key file not found
And when I copy the certificate in /root in /home/nic/root/etc/fred-client/ssl after /home/nic/root/bin/fred-client I receive :
FredClient 2.1.2
Type "help", "license" or "credits" for more information.
Using configuration from /home/nic/root/etc/fred/fred-client.conf
Connecting to localhost, port 22351 ...
ERROR: I cannot connect to the server localhost.
Connection socket.error: (111, 'Connection refused') (localhost:22351)
And when I type "http://localhost:22351/" in a browser it say :
« localhost » a refusé la connexion.
Les causes probables du problème sont
* un service n'est pas démarré ou
* le numéro de port 22351 est erroné.
What to do to solve this ?
hello sir
I've finished to install FRED. After runing scripts ,to create first registrar and zone, I verify in tables corresponding I don't found any row modified.
How to do for creating first registrar and zone ?
thank you
hello sir
When I have finished to run
./fred-manager install all is ok but when I run:
./fred-manager start sent back errors like:
Starting PostgreSQL failed!
Starting omniNames... failed!
-su: /home/nic/root/sbin/fred-dbmanager: Permission non accordée
Starting FRED central registry CORBA servers... failed!
Starting Apache....
Starting FRED webadmin HTTP server....
Is it the fact that those services were already runing ?
thank you
I'm installing FRED on Debian and when I do :
../fred-manager install :
ImportError: No module named simplejson
fred-webadmin needs simplejson module.
How to solve this
thak you
I tried to install a new certificate, but this gives me this error:
ERROR: socket.sslerror: (1, 'error:14094418:SSL routines:SSL3_READ_BYTES:tlsv1 alert unknown ca') (localhost:700)
Certificate not signed by verified certificate authority.
Any certificate specialist there ? :)
Petur
This email and its attachments may be confidential and are intended solely for the use of the individual to whom it is addressed.
If you are not the intended recipient or authorized to receive information for the intended recipient you are notified that disclosing, copying, distributing or taking any action in reliance on the contents of this information is strictly prohibited. If the email contains proposals, they are valid for 30 days following the date of email transmission. Finally, the recipient should check this email and any attachment for the presence of viruses. The company accepts no liability for any damage caused by any virus transmitted by email.
_________________________________________________________________
Sur Windows Live Ideas, découvrez en exclusivité de nouveaux services en ligne... si nouveaux qu'ils ne sont pas encore sortis officiellement sur le marché !
http://ideas.live.com
_________________________________________________________________
Découvrez Windows Live Spaces et créez votre site Web perso en quelques clics !
http://spaces.live.com/signup.aspx
Suddenly i get this error, when i connect to fred-client:
-----------------------------------------------------------------------------
Using configuration from /etc/fred/fred-client.conf
Connecting to localhost, port 700 ...
ERROR: socket.sslerror: (1, 'error:140770FC:SSL routines:SSL23_GET_SERVER_HELLO:unknown protocol') (localhost:700)
Certificate not signed by verified certificate authority.
-----------------------------------------------------------------------------
I guess its because my certificate is out of date ?
Is it possible to disable SSL in fred-client ? (since no customers/registrars are using it directly)
If it is possible, how can i do it ?
regards
Petur
This email and its attachments may be confidential and are intended solely for the use of the individual to whom it is addressed.
If you are not the intended recipient or authorized to receive information for the intended recipient you are notified that disclosing, copying, distributing or taking any action in reliance on the contents of this information is strictly prohibited. If the email contains proposals, they are valid for 30 days following the date of email transmission. Finally, the recipient should check this email and any attachment for the presence of viruses. The company accepts no liability for any damage caused by any virus transmitted by email.
Hi All,
I am trying to implement FRED as test in a Ubuntu Server, but I am
having many problems.
I am following the instructions as described in the link below:
http://fred.nic.cz/wiki/howto
After installing fred server I am trying to install fred-server python
component but I get the following errors:
user@nsx:~/fred/fred-pyfred-2.1.2$ python setup.py build_idl
usage: setup.py [global_opts] cmd1 [cmd1_opts] [cmd2 [cmd2_opts] ...]
or: setup.py --help [cmd1 cmd2 ...]
or: setup.py --help-commands
or: setup.py cmd --help
error: invalid command 'build_idl'
user@nsx:~/fred/fred-pyfred-2.1.2$
My first question is for the instructions in the link above, they seems
to be old (fred 1.6.2 - I have downloaded fred 2.1.2). In the last step:
Create initial configuration
# mkdir /etc/fred
# cp server.conf.example /etc/fred/server.conf
I couldn't find any server.conf.example just server.conf and
server.conf.in???
Is there any updated instructions and can I have them so I can try again
step by step the implementation.
or is there any mistake made by me during the implementations step till
this point, which gives me this errors??
Another thing:
when installing fred server it didn't work the command: ./configure
--prefix=/usr && make because could not find the idl so I used the
command:
./configure --prefix=/usr --with-idldir=/usr/share/idl/fred/idl && make
because the idl dir was not /usr/share/idl/fred
but /usr/share/idl/fred/idl
can I have some instructions for implementations of fred-2.1.2 please
because to me those instructions looks old??
Thanks
Adriatik
_________________________________________________________________
Découvrez Windows Live Spaces et créez votre site Web perso en quelques clics !
http://spaces.live.com/signup.aspx
When setting up fred-client the usual procedure for installing it works
as expected.
But when calling it it gives this error:
ERROR: getaddrinfo() socket.error [9] servname not supported for ai_socktype
The solution is to modify fred-client.conf so the socket type is forced,
as shown here
;; Force socket type. Valid value is: IPv4 or IPv6.
;; Default is to use server's socket type.
;socket = IPv6
socket = IPv4
Mario
I've noticed that the nssets and keysets are extensions to the regular
EPP descriptions in the RFCs.
I have a question: would those extensions be a problem if a registrar
expects the hosts and domains based on that?. I ask this because the
client development the NIC-CR (Costa Rica) made was based on the hosts
and domains transactions described in the RFCs.
Best regards.
I'm attempting to install FRED onto a Gentoo box. I'm using fred-manager
to do the grunt work.
I've started with a reasonably minimal install box (no X, etc) and so
far - added:
emerge -uv omniORB boost libdaemon postgresql bind bind-tools doxygen
pyorbit tinyerp-server freefont-ttf
I'm installing 'fred' into "/home/fred' - as user 'fred'.
Near the top - I get:-
------------------------------------------------------------------------------------------------------
[much deleted]
Generating python stubs from IDL files
omniidl -Cbuild/stubs -bpython -Wbinline -Wbpackage=pyfred.idlstubs
/home/fred/root/share/idl/fred/FileManager.idl
/home/fred/root/share/idl/fred/Mailer.idl
/home/fred/root/share/idl/fred/TechCheck.idl
/home/fred/root/share/idl/fred/ZoneGenerator.idl
omniidl: Could not import back-end 'python'
omniidl: Maybe you need to use the -p option?
omniidl: (The error was 'No module named python')
error: Return status of omniidl is 256
/home/fred/download/src/fred-doc2pdf-2.0.0/setup.cfg.template has been
copied to setup.cfg.
Updating setup configuration file (setup.cfg).
running install
ImportError: No module named trml2pdf
ImportError: No module named rml2pdf
ImportError: No module named trml2pdf
Module rml2pdf was found.
Looking for folders 'freefont', 'truetype', 'freefont-ttf'...
Found 1 folder(s).
Found 12 fonts in folder '/usr/share/fonts/freefont-ttf'.
Found font family 'FreeSans.ttf'
Configuration file fred-doc2pdf.conf has been updated
------------------------------------------------------------------------------------------------------
Has anyone installed FRED on Gentoo?
What am I still missing?
Python is installed - version 2.5.2
Is this error a problem? - I'm worried about "No module named python"
----------------
then...
At the end of my output - I get:-
-------------------------------------------------------------------------------------------------------------------------------
/usr/bin/install -c -m 644 'doc/html/tab_b.gif'
'/home/fred/root/share/doc/fred-mod-eppd/tab_b.gif'
/usr/bin/install -c -m 644 'doc/html/tab_l.gif'
'/home/fred/root/share/doc/fred-mod-eppd/tab_l.gif'
/usr/bin/install -c -m 644 'doc/html/tab_r.gif'
'/home/fred/root/share/doc/fred-mod-eppd/tab_r.gif'
/usr/bin/install -c -m 644 'doc/html/tabs.css'
'/home/fred/root/share/doc/fred-mod-eppd/tabs.css'
make[2]: Leaving directory `/home/fred/build/fred-mod-eppd'
make[1]: Leaving directory `/home/fred/build/fred-mod-eppd'
/home/fred/download/src/fred-webadmin-3.1.1/setup.cfg.template has been
copied to setup.cfg.
Updating setup configuration file (setup.cfg).
running install
ImportError: No module named simplejson
fred-webadmin needs simplejson module.
Checking dependencies.
-------------------------------------------------------------------------------------------------------------------------------
Again - is this the natural end of the compilation?
What is the "simplejson" module?
** Just found an installable package by that name **
Trying to start everything - I get:-
$ ./fred-manager start
ERROR: Starting PostgreSQL
SUCCESS: Starting omniNames...
SUCCESS: Starting FRED central registry CORBA servers...
ERROR: Starting Apache...
./fred-manager: line 716:
/home/fred/root/etc/init.d/fred-webadmin-server: No such file or directory
./fred-manager: line 11: /home/fred/root/etc/init.d/local_named: No such
file or directory
ERROR: Starting local named
cannot chdir(/var/spool/cron), bailing out.
/var/spool/cron: Permission denied
cannot chdir(/var/spool/cron), bailing out.
/var/spool/cron: Permission denied
cannot chdir(/var/spool/cron), bailing out.
/var/spool/cron: Permission denied
My concerns here are - why would I even expect a non-root user to be
able to start PostgreSQL?? - (which was already running)
There seems to be an ugly mix between 'system' jobs and 'user' jobs?
The same goes for Apache - only system users (or root) should be able to
start (and stop) system processes.
Same for the contents of /var/spool/cron.
Should I actually copy all of "home/fred/root" to my machines "/" ???
lastly - the suggestion of just adding four packages (as well as generic
tools) does seem misleading.
Now the 'install' ends with:-
-----------------------------------
Updating setup configuration file (setup.cfg).
running install
ImportError: No module named omniORB
fred-webadmin needs omniORB module.
Checking dependencies.
... and I'm pretty sure omniORB 4.0.5 is installed.
--
. . ___. .__ Posix Systems - Sth Africa
/| /| / /__ mje(a)posix.co.za - Mark J Elkins, SCO ACE, Cisco CCIE
/ |/ |ARK \_/ /__ LKINS Tel: +27 12 807 0590 Cell: +27 82 601 0496
Hello,
I am trying to install FRED for testing, but I am having problems in
installing all the necessary components. My problem is omniORB?
I downloaded and installed omniORB4, following the instructions but
still when I try to install FRED it gets the following error.
checking for OMNIORB4... configure: error: Package requirements
(omniORB4 != 4.1.1, omniDynamic4, omnithread3) were not met:
Requested 'omniORB4 != 4.1.1' but version of omniORB4 is 4.1.1
I know that may be not directly for here my question, but can someone
give me a little help in a step by step guide for installing and make
the omniORB work.
I have read some instructions (installing omniORB4) but after all the
steps still nothing??
Thanks
Adriatik
Which nameserver software does FRED use ? Bind ?
Is there a zone-file on my server where i can see all the domains, which i have created and put into zone ? (I cant find it)
regards
Petur
This email and its attachments may be confidential and are intended solely for the use of the individual to whom it is addressed.
If you are not the intended recipient or authorized to receive information for the intended recipient you are notified that disclosing, copying, distributing or taking any action in reliance on the contents of this information is strictly prohibited. If the email contains proposals, they are valid for 30 days following the date of email transmission. Finally, the recipient should check this email and any attachment for the presence of viruses. The company accepts no liability for any damage caused by any virus transmitted by email.
I think FRED contains one or more functions, that can be used for sending emails.
How do i send emails, and where can i find documentation about this ?
regards
Petur
This email and its attachments may be confidential and are intended solely for the use of the individual to whom it is addressed.
If you are not the intended recipient or authorized to receive information for the intended recipient you are notified that disclosing, copying, distributing or taking any action in reliance on the contents of this information is strictly prohibited. If the email contains proposals, they are valid for 30 days following the date of email transmission. Finally, the recipient should check this email and any attachment for the presence of viruses. The company accepts no liability for any damage caused by any virus transmitted by email.
Hello FRED users,
I wanted to know what was the status of FRED regading IDN, I have been
able to find a little paper written by Jaromir Talir dated from
8/4/2008 which described the feature as "future" plan.
Can you tell me a bit more.
Sincerly yours.
¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯
Gregober ---> PGP ID --> 0x1BA3C2FD
bsd @at@ todoo.biz
¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯
P "Please consider your environmental responsibility before printing
this e-mail"
Do I have to change both Street, City, Postal Code, Country Code and State, when i only need to change the City name ? (see examples below)
REG-FO@localhost> !update_contact
Interactive input mode started. Press Ctrl+C to abort or Ctrl+D to finish command.
Contact ID [required]: CID001000
Change values / Postal informations / Name [optional]: Petur Kirke
Change values / Postal informations / Organisation [optional]: Simprentis
Change values / Postal informations / Address / Street[1/3] [required only if part is set]: Inni á fløtum 15
Change values / Postal informations / Address / Street[2/3] [optional]:
Change values / Postal informations / Address / City [required]: Kaldbak
Change values / Postal informations / Address / Postal code [required]: 180
Change values / Postal informations / Address / Country code [required]: fo
Change values / Postal informations / Address / State or province [optional]:
Change values / Phone [optional]: +298.222222
REG-FO@localhost> !update_contact
Interactive input mode started. Press Ctrl+C to abort or Ctrl+D to finish command.
Contact ID [required]: CID001000
Change values / Postal informations / Name [optional]:
Change values / Postal informations / Organisation [optional]:
Change values / Postal informations / Address / Street[1/3] [required only if part is set]:
Change values / Phone [optional]: +298.222222
When i dont put anything in Street, it jumps directly to Phone ?
This email and its attachments may be confidential and are intended solely for the use of the individual to whom it is addressed.
If you are not the intended recipient or authorized to receive information for the intended recipient you are notified that disclosing, copying, distributing or taking any action in reliance on the contents of this information is strictly prohibited. If the email contains proposals, they are valid for 30 days following the date of email transmission. Finally, the recipient should check this email and any attachment for the presence of viruses. The company accepts no liability for any damage caused by any virus transmitted by email.
Hi,
I'm trying to change zone serial number from the current sequence (unix
time)to YYYYMMDD format ...please help. Is it a genzone/corba function?
Regards,
Simon.
FRED has a regular procedure that automatically delete
contacts, nssets and keysets that are 6 month unattached and unmodified.
Is it possible to mark certain contacts, or set a state, so they will NOT be deleted, even if they are 6 months unattached and unmodified ?
This email and its attachments may be confidential and are intended solely for the use of the individual to whom it is addressed.
If you are not the intended recipient or authorized to receive information for the intended recipient you are notified that disclosing, copying, distributing or taking any action in reliance on the contents of this information is strictly prohibited. If the email contains proposals, they are valid for 30 days following the date of email transmission. Finally, the recipient should check this email and any attachment for the presence of viruses. The company accepts no liability for any damage caused by any virus transmitted by email.
In .fo we demand from our users, that DNS (nameservers) shall be working, before they can apply for a domain. Because of this, we do a check at the time, when the users is applying for the domain on our website. The check-script is checking, if the domain, which the user applies for, are registered on the nameservers, which he specifies as nameservers for this domain.
Can i use the fred-client command "technical_test" for this purpose ? Or does this command have another purpose ?
And if yes, then which level should i be using ?
I have tried, but it seems not to give me correct answers on this.
regards
Petur
This email and its attachments may be confidential and are intended solely for the use of the individual to whom it is addressed.
If you are not the intended recipient or authorized to receive information for the intended recipient you are notified that disclosing, copying, distributing or taking any action in reliance on the contents of this information is strictly prohibited. If the email contains proposals, they are valid for 30 days following the date of email transmission. Finally, the recipient should check this email and any attachment for the presence of viruses. The company accepts no liability for any damage caused by any virus transmitted by email.
Hello
I can see that the FRED database (PostgreSQL) is in UTF-8.
Since i am using PHP, and i got some problems with UTF-8, I am considering to change the PostgreSQL database to ISO 8859-1 character set.
question 1)
Is it safe to do this ?
Is there anything i should reconsider before doing this ?
question 2)
And how can i set the character set, if i use the commands below ?:
fred-dbmanager uninstall
fred-dbmanager install
Petur
This email and its attachments may be confidential and are intended solely for the use of the individual to whom it is addressed.
If you are not the intended recipient or authorized to receive information for the intended recipient you are notified that disclosing, copying, distributing or taking any action in reliance on the contents of this information is strictly prohibited. If the email contains proposals, they are valid for 30 days following the date of email transmission. Finally, the recipient should check this email and any attachment for the presence of viruses. The company accepts no liability for any damage caused by any virus transmitted by email.
Im trying to figure out where the Administrative Contact for one Domain are stored in the PostgreSQL database ?
The only table i can find is epp_info_buffer_content. Could it be this one ?
regards
Petur
This email and its attachments may be confidential and are intended solely for the use of the individual to whom it is addressed.
If you are not the intended recipient or authorized to receive information for the intended recipient you are notified that disclosing, copying, distributing or taking any action in reliance on the contents of this information is strictly prohibited. If the email contains proposals, they are valid for 30 days following the date of email transmission. Finally, the recipient should check this email and any attachment for the presence of viruses. The company accepts no liability for any damage caused by any virus transmitted by email.
I've created a zone "test" using fred_client.
For updating the BIND files I use "genzone_client" as advised recently
by Vyteszlav. Here are the results:
-----------------------------------------------------------------------------------------------------------------------------------------------------------------
root@mguerra:~# genzone_client test
Error when generating zone: CORBA failure, original exception is:
CosNaming.NamingContext.NotFound(why=missing_node,
rest_of_name=[CosNaming.NameComponent(id='ZoneGenerator', kind='Object')])
Exception exceptions.AttributeError: "'Zone' object has no attribute
'zonedata'" in <bound method Zone.__del__ of <pyfred.zone.Zone object at
0xb79009ac>> ignored
----------------------------------------------------------------------------------------------------------------------------------------------------------------
These are the genzone.conf contents:
----------------------------------------------------------------------------------------------------------------------------------------------------------------
[general]
# host[:port]
nameservice= localhost:2809
context = fred
reload = 1
verbose = 0
# if empty all zones will be generated
zones =
[0.2.4.e164.arpa]
chunk = 3
maxchanges= 30
backupdir = /usr/local/var/0.2.4.e164.arpa
zonedir = /etc/bind
[cz]
chunk = 100
maxchanges= 10%
backupdir = /usr/local/var/cz
zonedir = /etc/bind
[cr]
chunk = 100
maxchanges= 10%
backupdir = /usr/local/var/cz
zonedir = /etc/bind
[test] <------------------------------------------------- note this
-----------------------------------------------------
chunk = 100
maxchanges= 10%
backupdir = /usr/local/var/cz
zonedir = /etc/bind
----------------------------------------------------------------------------------------------------------------------------------------------------------------
The service that runs genzone_client (omniNames) is active.
Any hints?.
Thanks in advance.
I would be more than happy contributing to FRED in these ways:
1. Making a tutorial for installing (from scratch) it and configuring it
correctly, then creating a base domain (like "cr"), creating contacts,
nssets, etc. and generating the corresponding BIND files. Afterwards
using the administrative tasks, etc.
2. Translating BIND to Spanish.
When I end the test configuration I think I can start with this (I've
documented the installation and configuration process).
Best regards
Hello.
We are starting to test FRED in earnest.
By using fred-client we have suucessfully created both contacts and nssets.
When trying to create .cz domains the result is satisfactory, but
not with .cr (Costa Rica) domains. Notice that we inserted a record
in the "zones" table and another in the "zones_ns" table.
Here is what happens:
--------------------------------
REG-FRED_A@localhost> create_domain cwatson.cr NIC:020 NULL NICNS:020
NULL (3 y)
Do you really want to send this command to the server? (y/N): y
ERROR: Server returned an empty message.
Ending session at localhost
Disconnected.
Try to automaticly reconnect - send login.
Connecting to localhost, port 700 ...
Connected!
ERROR: Authentication error
----------------------------------
If the domain were, say, cwatson.cz it is created with no problems.
I'm sure I'm omitting something.
Thanks in advance.
Mario Guerra
NIC-CR
I am developing a client interface against FRED. So far everythings fine.
Now i need to make it possible for customers to search for Contacts and other things, and it seems like, if i use the fred-client command, things go to slow.
For example when i need to search for Names of Contacts, i first need to do "list_contacts", and then go through every CONTACT, and check for the name.
If i use an sql-query i can search directly on the NAME.
So, the way to do this, is by SQL query directly against the PostgreSQL database ? It will not interfere with anything else ? What will you recommend ?
regards
Petur
This email and its attachments may be confidential and are intended solely for the use of the individual to whom it is addressed.
If you are not the intended recipient or authorized to receive information for the intended recipient you are notified that disclosing, copying, distributing or taking any action in reliance on the contents of this information is strictly prohibited. If the email contains proposals, they are valid for 30 days following the date of email transmission. Finally, the recipient should check this email and any attachment for the presence of viruses. The company accepts no liability for any damage caused by any virus transmitted by email.
REG-FO@localhost> create_nsset NS433 ((NS1.DOTSERV.NET), (NS2.DOTSERV.NET)) ID002103
Do you really want to send this command to the server? (y/N): y
Return code: 2005
Reason: Parameter value syntax error
ERROR: Element that caused a server error condition: <nsset:name xmlns:nsset='http://www.nic.cz/xml/epp/nsset-1.2'>NS1.DOTSERV.NET</nsset:name>
Reason: Invalid nameserver hostname.
Element that caused a server error condition: <nsset:name xmlns:nsset='http://www.nic.cz/xml/epp/nsset-1.2'>NS2.DOTSERV.NET</nsset:name>
Reason: Invalid nameserver hostname.
Why do i get this error ?
Do i need to specify wich countries are allowed for nameservers ? If yes, how do i do that ?
regards
Petur
This email and its attachments may be confidential and are intended solely for the use of the individual to whom it is addressed.
If you are not the intended recipient or authorized to receive information for the intended recipient you are notified that disclosing, copying, distributing or taking any action in reliance on the contents of this information is strictly prohibited. If the email contains proposals, they are valid for 30 days following the date of email transmission. Finally, the recipient should check this email and any attachment for the presence of viruses. The company accepts no liability for any damage caused by any virus transmitted by email.
As i am programming and testing, i have filled up the PostgreSQL database of FRED with testdata.
Now i would like the delete all the data, which means all domains, contacts, nssets etc.
Is there some fast way to do this ? or do i have to empty every table, one at a time ? and would that solution be secure ?
regards
Petur
________________________________________
Fra: fred-users-bounces(a)lists.nic.cz [fred-users-bounces(a)lists.nic.cz] På vegne af Jaromír Talíř [jaromir.talir(a)nic.cz]
Sendt: 28. november 2008 17:31
Til: fred-users(a)lists.nic.cz
Emne: Re: contact ID
This Fred feature is called "handle protection". We decided to prevent
handle from it's immediate registration to protect contacts. Imagine
situation when some domain is registered for contact C123 and this
person will switch to use different contact handle for it's domain and
delete old unused contact C123. Someone can register C123 and claim to
registrar that he is original owner of domain. We think registrar need
some time for example to do update of its own contact database. After
some time (2 month) this contact is not protected anymore and anybody
can register it.
Jaromir
Petur Kirke píše v Po 24. 11. 2008 v 15:57 +0000:
> I was trying to create contacts programmatically, something like this:
>
> create_contact ID1 ...
>
> and i get this response:
>
> Return code: 2005
> Reason: Parameter value syntax error
>
> ERROR: Element that caused a server error condition: <contact:id xmlns:contact='http://www.nic.cz/xml/epp/contact-1.4'>ID1</contact:id>
> Reason: within protection peridod.
>
> I think the reason is because ID1 is already in the database, right ?
> and how long is this protection period ? when can i insert this ID again ?
>
> This email and its attachments may be confidential and are intended solely for the use of the individual to whom it is addressed.
> If you are not the intended recipient or authorized to receive information for the intended recipient you are notified that disclosing, copying, distributing or taking any action in reliance on the contents of this information is strictly prohibited. If the email contains proposals, they are valid for 30 days following the date of email transmission. Finally, the recipient should check this email and any attachment for the presence of viruses. The company accepts no liability for any damage caused by any virus transmitted by email.
> _______________________________________________
> Fred-users mailing list
> Fred-users(a)lists.nic.cz
> https://lists.nic.cz/mailman/listinfo/fred-users
This email and its attachments may be confidential and are intended solely for the use of the individual to whom it is addressed.
If you are not the intended recipient or authorized to receive information for the intended recipient you are notified that disclosing, copying, distributing or taking any action in reliance on the contents of this information is strictly prohibited. If the email contains proposals, they are valid for 30 days following the date of email transmission. Finally, the recipient should check this email and any attachment for the presence of viruses. The company accepts no liability for any damage caused by any virus transmitted by email.
In the documentation it says, that the syntax of the contact ID should be like this:
CID:ID02
but i have inserted only this:
ID02
and it worked fine.
is it important to include "CID:" ?
This email and its attachments may be confidential and are intended solely for the use of the individual to whom it is addressed.
If you are not the intended recipient or authorized to receive information for the intended recipient you are notified that disclosing, copying, distributing or taking any action in reliance on the contents of this information is strictly prohibited. If the email contains proposals, they are valid for 30 days following the date of email transmission. Finally, the recipient should check this email and any attachment for the presence of viruses. The company accepts no liability for any damage caused by any virus transmitted by email.
I have created one domain nic.fo. When i ask for info about this domain, i get this response:
Domain name nic.fo
Repository object ID D0000000006-CZ
Created by REG-TLD
Designated registrar REG-TLD
Created on 2008-11-06T12:19:50Z
Expiration date 2009-11-06
Password for transfer MCQwdZ7m
Status outzone - Domain is not generated into zone
Registrant ID ID05
question 1) Is it possible to change CZ to FO in the "Repository object ID", or is it really nessesary ? (is it used publicly)
question 2) Why is "Domain not generated into zone" and when does this happen ?
This email and its attachments may be confidential and are intended solely for the use of the individual to whom it is addressed.
If you are not the intended recipient or authorized to receive information for the intended recipient you are notified that disclosing, copying, distributing or taking any action in reliance on the contents of this information is strictly prohibited. If the email contains proposals, they are valid for 30 days following the date of email transmission. Finally, the recipient should check this email and any attachment for the presence of viruses. The company accepts no liability for any damage caused by any virus transmitted by email.
In Faroe Islands we have 2 kinds of domains, type A or B.
When i do the fred command CREATE_DOMAINS, is there any place (field), where i could store this information about the domain (A or B) ?
If this is not possible, then is there any other place to store this information ?
This email and its attachments may be confidential and are intended solely for the use of the individual to whom it is addressed.
If you are not the intended recipient or authorized to receive information for the intended recipient you are notified that disclosing, copying, distributing or taking any action in reliance on the contents of this information is strictly prohibited. If the email contains proposals, they are valid for 30 days following the date of email transmission. Finally, the recipient should check this email and any attachment for the presence of viruses. The company accepts no liability for any damage caused by any virus transmitted by email.
I was trying to create contacts programmatically, something like this:
create_contact ID1 ...
and i get this response:
Return code: 2005
Reason: Parameter value syntax error
ERROR: Element that caused a server error condition: <contact:id xmlns:contact='http://www.nic.cz/xml/epp/contact-1.4'>ID1</contact:id>
Reason: within protection peridod.
I think the reason is because ID1 is already in the database, right ?
and how long is this protection period ? when can i insert this ID again ?
This email and its attachments may be confidential and are intended solely for the use of the individual to whom it is addressed.
If you are not the intended recipient or authorized to receive information for the intended recipient you are notified that disclosing, copying, distributing or taking any action in reliance on the contents of this information is strictly prohibited. If the email contains proposals, they are valid for 30 days following the date of email transmission. Finally, the recipient should check this email and any attachment for the presence of viruses. The company accepts no liability for any damage caused by any virus transmitted by email.
In our current system in Faroe Islands, we dont use nssets.
For each domain name there are 2 nameservers.
So we only have one domain name table, and one nameserver table.
In FRED i think it is impossible to connect a nameserver directly to one domain ?
I can only connect a nsset to one domain, right ?
Which means i have to go through all our nameservers, and put them into nssets, right ?
Can you confirm, that I have understood this correct ?
regards
Petur
This email and its attachments may be confidential and are intended solely for the use of the individual to whom it is addressed.
If you are not the intended recipient or authorized to receive information for the intended recipient you are notified that disclosing, copying, distributing or taking any action in reliance on the contents of this information is strictly prohibited. If the email contains proposals, they are valid for 30 days following the date of email transmission. Finally, the recipient should check this email and any attachment for the presence of viruses. The company accepts no liability for any damage caused by any virus transmitted by email.
In Faroe Islands we do NOT use registrars.
The customers apply for domain names directly on the cctldM's homepage.
For each domain we have 3 kinds of contacts:
Administrative Contact (Holder of Domain)
Nameserver Contact (Zone Contact)
Billing Contact (where to send the bill)
I am trying to use as much as possible of FRED, and build as little as possible myself.
So i was thinking about, if i could maintain our "Billing Contacts" in the same way as "Registrars" are maintained in the FRED system ?
I asked something a bit similar before, and I think that you will not recommend this, but i just want to hear your opinion again, so i can
understand it as good as possible.
Is it to difficult with all the usernames and passwords ? (technical)
And are there other things, where there is a difference between "registrars" and our "Billing contacts" ? (data in database?)
What do you think ?
This email and its attachments may be confidential and are intended solely for the use of the individual to whom it is addressed.
If you are not the intended recipient or authorized to receive information for the intended recipient you are notified that disclosing, copying, distributing or taking any action in reliance on the contents of this information is strictly prohibited. If the email contains proposals, they are valid for 30 days following the date of email transmission. Finally, the recipient should check this email and any attachment for the presence of viruses. The company accepts no liability for any damage caused by any virus transmitted by email.
We have a few domain names, which we dont want anyone to apply for, for example com.fo, net.fo, org.fo and so on.
Is this what the table domain-blacklist is for ?
If yes, how do i put these domain names in the table ? Manually or with a command ?
This email and its attachments may be confidential and are intended solely for the use of the individual to whom it is addressed.
If you are not the intended recipient or authorized to receive information for the intended recipient you are notified that disclosing, copying, distributing or taking any action in reliance on the contents of this information is strictly prohibited. If the email contains proposals, they are valid for 30 days following the date of email transmission. Finally, the recipient should check this email and any attachment for the presence of viruses. The company accepts no liability for any damage caused by any virus transmitted by email.
Dear all,
I have installed FEDORA 9 i.386,
I installed the fred-repo-1.0-1.noarch.rpm and then install FRED with yum
install fred-*.
I restarted HTTPD service, the fred-server and fred-webadmin-server.
All went successfully except the fred-webadmin-server, showing the
following:
*#/etc/init.d/fred-webadmin-server start
Starting FRED webadmin HTTP server... [ OK ]
KEEP LOGGING TO /var/log/fred-webadmin-20081112.log
[# -----====### STARTING ADIF ###====-----
[12/Nov/2008:11:32:39] HTTP Port 18456 not free on 'localhost'
[12/Nov/2008:11:32:39] HTTP Port 18456 not free on 'localhost'
Traceback (most recent call last):
File "/usr/sbin/fred-webadmin", line 12, in <module>
adif.runserver()
File "/usr/lib/python2.5/site-packages/fred_webadmin/adif.py", line 1329,
in runserver
cherrypy.quickstart(root, '/', config=config.cherrycfg)
File "/usr/lib/python2.5/site-packages/cherrypy/__init__.py", line 181, in
quickstartserver.quickstart()
File "/usr/lib/python2.5/site-packages/cherrypy/_cpserver.py", line 69, in
quickstartself.start()
File "/usr/lib/python2.5/site-packages/cherrypy/_cpserver.py", line 95, in
startself._start_http(httpserver)
File "/usr/lib/python2.5/site-packages/cherrypy/_cpserver.py", line 104,
in _start_httpwait_for_free_port(*bind_addr)
File "/usr/lib/python2.5/site-packages/cherrypy/_cpserver.py", line 250,
in wait_for_free_portraise IOError(msg)
IOError: Port 18456 not free on 'localhost'*
THANKs
-
*Edouard MASHYARINGA.
ccTLD Administartor (.rw) Rwanda
RICTA/RITA
KIGALI/Rwanda
Mob: 250 08352776
250 05129000*
In Faroe Islands we have 2 kinds of domain applications named A applications and B applications.
When the customer makes an A application, the domain is created immediately.
When the customer makes a B application, the domain will be created 1 month after the application is done.
So my question is:
Is it possible to create one domain (incl. contacts, nameservers) in FRED, and make it DISABLED until 1 month is gone ?
Or do i have to save all the information outside of FRED until 1 month is gone, and then create the domain in FRED ?
regards
Petur
This email and its attachments may be confidential and are intended solely for the use of the individual to whom it is addressed.
If you are not the intended recipient or authorized to receive information for the intended recipient you are notified that disclosing, copying, distributing or taking any action in reliance on the contents of this information is strictly prohibited. If the email contains proposals, they are valid for 30 days following the date of email transmission. Finally, the recipient should check this email and any attachment for the presence of viruses. The company accepts no liability for any damage caused by any virus transmitted by email.
Hey Guys,
I have got FRED operating today. However, when I use fred-client and
try and create_contacts I get command failed.
Below is the output;
wogg_85(a)192.168.0.19> create_contact CID:ID02 'Jan Ban' info(a)mail.com
Street Brno 123000 CZ
Do you really want to send this command to the server? (y/N): y
ERROR: Command failed
As this is all very new to me, I am not sure what else I can post. I
followed the instructions at http://fred.nic.cz/wiki/howto to get it
operating. Also the script to load the first zone did not work. This
is becuase the FRED binary is not around, I assume the replacement is
fred-admin, but unsure how it would work.
Any help would be greatly appreciated! Let me know if you need any
more info.
Regards,
Julian
I have tryed the client_example.php script.
Whatever i do, it answeres:
Error:
fred_client not instaled properly. See help or set prefix of path.
As far as i know fred_client is working on the machine as it should.
So i want to ask these questions:
1) What should i write in the $exec_path field ? The path to what ?
2) Where (in which file) do i set the PHP output mode ?
3) My configuration file is in /etc/fred. Should i move it too /etc ?
regards
Petur
This email and its attachments may be confidential and are intended solely for the use of the individual to whom it is addressed.
If you are not the intended recipient or authorized to receive information for the intended recipient you are notified that disclosing, copying, distributing or taking any action in reliance on the contents of this information is strictly prohibited. If the email contains proposals, they are valid for 30 days following the date of email transmission. Finally, the recipient should check this email and any attachment for the presence of viruses. The company accepts no liability for any damage caused by any virus transmitted by email.
Hey,
I was curios how fred handles zone generation automatically. I have
found the command line tool, but I am un-sure if this process is
automated.
--julian
Jaromír Talír,
or anyone else,
Although my httpd was running ok, I am getting the following
httpd error when I try to active the fred-server, could you please
suggest what I can do to resolve it?
[root@ngoli paulos]# /etc/rc.d/init.d/fred-server start
Starting FRED central registry CORBA servers... [ OK ]
[root@ngoli paulos]#
[root@ngoli paulos]# /etc/rc.d/init.d/httpd restart
Stopping httpd: [ OK ]
Starting httpd: (13)Permission denied: make_sock: could not bind to address [::]:700
(13)Permission denied: make_sock: could not bind to address 0.0.0.0:700
no listening sockets available, shutting down
Unable to open logs
[FAILED]
[root@ngoli paulos]#
This happens soon after installing fred-*.
Regards,
Paulos
On 3 Nov 2008 at 17:29, Jaromír Talír wrote:
> Hello Paulos,
>
> Dr Paulos Nyirenda píse v Po 27. 10. 2008 v 10:15 +0200:
> > Hello,
> >
> > Will there be anyone from .CZ at the ICANN Cairo meeting whom I could
> > meet to consult on FRED?
>
> I will not be in Cairo, but our CEO Ondrej Filip is there. I thing he
> can answer some questions about FRED.
>
> > It would really help if I could have a brief technical meeting on
> > FRED.
> > I have installed FRED on fedora8 and I need a few pointer on a few
> > areas including
> > (a) how I could finalise httpd, epp configuartion,
> > (b) how to use it successfully
>
> I don't know how to answer these questions. If you installed all
> components using 'yum install fred-*'. You have to start all servers.
>
> sudo /etc/init.d/postgresql initdb
> sudo /etc/init.d/postgresql start
> sudo /etc/init.d/omniNames start
> sudo /etc/init.d/fred-server start
> sudo /etc/init.d/httpd start
> sudo /etc/init.d/fred-webadmin-server start
>
> Then you can connect to server with:
> /usr/bin/fred-client
>
> > (c) how I could efficiently or quickly import our current .mw ccTLD
> > registry data into FRED
>
> First you will have to configure FRED for .mw. You shoud add your system
> registrar and your zone to FRED and allow this registrar to register
> this zone.
>
> /usr/sbin/fred-admin --zone_add --zone_fqdn=tz
> /usr/sbin/fred-admin --registrar_add --registrar_handle=REG-MW
>
> Now change in /etc/fred/fred-client.conf username from REG-FRED_A to
> REG-MW. You sould be able to connect with this registrar
>
> When we migrated from old system to FRED we used normal fred-client. You
> will have to create commands (create_contact, create_nsset,
> create_domain) that reflect your current database and use fred-client to
> process these commands.
>
> Regards,
> Jaromir
>
Paulos
==============================
Dr Paulos Nyirenda
Malawi SDNP Coodinator
----------------------------------------------------------
Malawi SDNP Webmail: http://www.sdnp.org.mw
Access your Malawi SDNP e-mail from anywhere in the world.
----------------------------------------------------------
Im thinking about, in which order i have to do the fred-client commands.
For example, when i want to run the create_domain command, i think under normal circumstances i first need to run the create_contact command.
And do i need to run check_domain before i run a create_domain command, or does the system check this automatically ?
And when i run delete_domain, does the system check, if i first have to delete one contact, which is only used in this domain ?
Is there any documentation on this subject ?
This email and its attachments may be confidential and are intended solely for the use of the individual to whom it is addressed.
If you are not the intended recipient or authorized to receive information for the intended recipient you are notified that disclosing, copying, distributing or taking any action in reliance on the contents of this information is strictly prohibited. If the email contains proposals, they are valid for 30 days following the date of email transmission. Finally, the recipient should check this email and any attachment for the presence of viruses. The company accepts no liability for any damage caused by any virus transmitted by email.
The FRED homepage now (2008.11.05 03:23 CET) shows this error:
Trac Error
TracError: The Trac Environment needs to be upgraded.
Run "trac-admin /var/trac/fred upgrade"
This email and its attachments may be confidential and are intended solely for the use of the individual to whom it is addressed.
If you are not the intended recipient or authorized to receive information for the intended recipient you are notified that disclosing, copying, distributing or taking any action in reliance on the contents of this information is strictly prohibited. If the email contains proposals, they are valid for 30 days following the date of email transmission. Finally, the recipient should check this email and any attachment for the presence of viruses. The company accepts no liability for any damage caused by any virus transmitted by email.
I have created one domain name with fred-client: NIC.FO
When i use the check_domain command (in Fred client) i get the answer, that this domain is created.
But when i look in the postgreSQL database, i cant find the domain name NIC.FO ?
It is not in the DOMAIN table, and not in the ZONE table.
In which table are the domain names stored ?
peter
________________________________
This email and its attachments may be confidential and are intended solely for the use of the individual to whom it is addressed.
If you are not the intended recipient or authorized to receive information for the intended recipient you are notified that disclosing, copying, distributing or taking any action in reliance on the contents of this information is strictly prohibited. If the email contains proposals, they are valid for 30 days following the date of email transmission. Finally, the recipient should check this email and any attachment for the presence of viruses. The company accepts no liability for any damage caused by any virus transmitted by email.
hi
im trying to get .fo domains into fred.
i first did this:
/usr/sbin/fred-admin --zone_add --zone_fqdn=fo
/usr/sbin/fred-admin --registrar_add --registrar_handle=REG-TLD
/usr/sbin/fred-admin --registrar_add_zone --zone_fqdn=fo --registrar_handle=REG-TLD
then i try to run this command in fred-client:
REG-TLD@localhost> create_domain nic.fo cid:REG-TLD
Do you really want to send this command to the server? (y/N): y
ERROR: Server returned an empty message.
Ending session at localhost
Disconnected.
Try to automaticly reconnect - send login.
Connecting to localhost, port 700 ...
Connected!
ERROR: Parameter value syntax error
Reason: contact handle of registrant does not exist.
What am i doing wrong ?
________________________________________
Fra: fred-users-bounces(a)lists.nic.cz [fred-users-bounces(a)lists.nic.cz] På vegne af Jaromír Talíř [jaromir.talir(a)nic.cz]
Sendt: 4. november 2008 13:50
Til: fred-users(a)lists.nic.cz
Emne: Re: SV: Fred dramas
You can use this commands which do almost the same:
/usr/sbin/fred-admin --zone_add --zone_fqdn=tld
/usr/sbin/fred-admin --registrar_add --registrar_handle=REG-TLD
/usr/sbin/fred-admin --registrar_add_zone --zone_fqdn=tld
--registrar_handle=REG-TLD
This will create new registrar as copy of REG-FRED_A, new zone as copy
of .cz and allow new registrar to register new zone.
Jaromir
Julian De Marchi píše v Út 04. 11. 2008 v 21:10 +1000:
> Jaromír Talíř wrote:
> > Yes, this is unimplemented section. We think once there will be some
> > registry statistics for internal usage, but there are no plans yet.
> > Currently our development in web administration interface (daphne) is
> > concentrated on Users, User profiles, Authorization and Auditing. I
> > expect next release in about month.
>
> One last question before I call it a night. On your site you have;
>
> #!/bin/bash
> ZONE=change_me
> PRIMARY=primary.ns.change_me
> HOSTMASTER=hostmaster.change_me
> fred -U fred fred << _EOF_
> INSERT INTO zone
> (fqdn,ex_period_min,ex_period_max,val_period,dots_max)
> VALUES('${ZONE}', 12, 12, 0, 1);
> INSERT INTO zone_soa (Zone, TTL, Hostmaster, Serial, Refresh,
> Update_retr, Expiry, Minimum, ns_fqdn) VALUES (curval('zone_id_seq'),
> 18000, '${HOSTMASTER}', NULL, 10600, 3600, 1209600, 7200, '${PRIMARY}');
> INSERT INTO zone_ns (Zone, fqdn, addrs) VALUES (curval('zone_id_seq'),
> '${PRIMARY}', '{}');
> INSERT INTO registrarinvoice (registrarid,zone,fromdate) VALUES
> (currval('registrar_id_seq'),curval('zone_id_seq'),NOW());
> _EOF_
>
>
> To create the first zone. How would one do this in the current version?
>
> --julian
>
> _______________________________________________
> Fred-users mailing list
> Fred-users(a)lists.nic.cz
> https://lists.nic.cz/mailman/listinfo/fred-users
This email and its attachments may be confidential and are intended solely for the use of the individual to whom it is addressed.
If you are not the intended recipient or authorized to receive information for the intended recipient you are notified that disclosing, copying, distributing or taking any action in reliance on the contents of this information is strictly prohibited. If the email contains proposals, they are valid for 30 days following the date of email transmission. Finally, the recipient should check this email and any attachment for the presence of viruses. The company accepts no liability for any damage caused by any virus transmitted by email.
Dear Jaromir.
thanks for ur support, I run the* yum install boost-devel *and run the
./fred-manager start and got the following message:
*# ./fred-manager start
Starting PostgreSQL [FAILED]
mkdir: cannot create directory `/root/root/nofred/omniNames/': No such
file or directory
Cannot open error log file: /root/root/nofred/omniNames.log
usage: omniNames [-start [<port>]]
[-logdir <directory name>]
[-nohostname]
[-errlog <file name>]
[-ignoreport]
[<omniORB-options>...]
Use -start option to start omniNames for the first time.
With no <port> argument, the standard default of 2809 is used.
Use -logdir option to specify the directory where the log/data files are
kept.
Use -nohostname to suppress the inclusion of the hostname in the log files.
Use -errlog option to specify where standard error output is redirected.
Use -ignoreport option to ignore the port specification when determining
the end points to listen on, using -ORBendPoint arguments instead.
You can also set the environment variable OMNINAMES_LOGDIR to specify the
directory where the log/data files are kept.
Starting omniNames... [ OK ]
./fred-manager: line 550: /root/root/etc/init.d/fred-server: No such file or
directory
Starting Apache... [FAILED]
./fred-manager: line 552: /root/root/etc/init.d/fred-webadmin-server: No
such file or directory
#*
*I checked the httpd, omniNames and postgres services status and found them
running.
Thank again for your support.*
On Wed, Oct 22, 2008 at 9:57 AM, Jaromir Talir via RT <fred(a)nic.cz> wrote:
> Hello,
>
> you have to install boost libraries:
>
> yum install boost-devel
>
> hope it will help.
>
> If you will have another questions, you can use our list
> https://lists.nic.cz/mailman/listinfo/fred-users
> There is an archive of emails where you can find some valuable
> informations.
>
> Regards,
> Jaromir
>
--
Edouard M.
rw ccTLD Administrator
Mob: 250 08352776
250 05129000
I have started to design the PHP Registrar Web Interface.
Just want to ask one simple question, i think i know the answer, but want to be sure:
In our system we want to have different users, for example:
Administrator
Office employee
And also every person who creates one domain, is a user, who will get a username and password.
Should we register these users and logs for these users action in our PHP Registrar Web Interface program, or is it possible to register it in the FRED database ?
What would you recommend ?
regards
Petur
________________________________
This email and its attachments may be confidential and are intended solely for the use of the individual to whom it is addressed.
If you are not the intended recipient or authorized to receive information for the intended recipient you are notified that disclosing, copying, distributing or taking any action in reliance on the contents of this information is strictly prohibited. If the email contains proposals, they are valid for 30 days following the date of email transmission. Finally, the recipient should check this email and any attachment for the presence of viruses. The company accepts no liability for any damage caused by any virus transmitted by email.
2 more questions:
1) Does FRED support IDN, and how can i import the special characters for .fo to FRED ?
2) Does the FRED logs save every action, that one user does, so its possible to trace back who did what ?
This email and its attachments may be confidential and are intended solely for the use of the individual to whom it is addressed.
If you are not the intended recipient or authorized to receive information for the intended recipient you are notified that disclosing, copying, distributing or taking any action in reliance on the contents of this information is strictly prohibited. If the email contains proposals, they are valid for 30 days following the date of email transmission. Finally, the recipient should check this email and any attachment for the presence of viruses. The company accepts no liability for any damage caused by any virus transmitted by email.
FYI
--
Experiences of a Small ccTLD
Stephen Deerhake
APTLD Member’s Meeting
Kuala Lumpur –22 May 2008
http://tinyurl.com/5dtc5t
greetings
marc
--
Les enfants teribbles - research and deployment
web : http://marc.cuseeme
i was facing the same problem, you will a lot of difficulties to install
the required packages, which include installing of python required
binaries,omniORB and omniORPy, apache modules and so on.
i migrate to Ubuntu linux and most of the required binaries will be
install using apt-get sub command, but probably you will be faced with too
problems:
1. managing SSL certificate.
2. Interface language which is not English.
and you have to remove any other http server except apache2
regards..
> Send Fred-users mailing list submissions to
> fred-users(a)lists.nic.cz
>
> To subscribe or unsubscribe via the World Wide Web, visit
> https://lists.nic.cz/mailman/listinfo/fred-users
> or, via email, send a message with subject or body 'help' to
> fred-users-request(a)lists.nic.cz
>
> You can reach the person managing the list at
> fred-users-owner(a)lists.nic.cz
>
> When replying, please edit your Subject line so it is more specific
> than "Re: Contents of Fred-users digest..."
>
>
> Today's Topics:
>
> 1. help - Re: installing FRED on Fedora 9 (Dr Paulos Nyirenda)
> 2. Re: Thanks, and a question (Jarom?r Tal??)
> 3. Re: Payment solution (Jarom?r Tal??)
> 4. Re: Integration of client into PHP, client_example.php
> (Jarom?r Tal??)
>
>
> ----------------------------------------------------------------------
>
> Message: 1
> Date: Tue, 21 Oct 2008 17:06:43 +0200
> From: "Dr Paulos Nyirenda" <paulos(a)sdnp.org.mw>
> Subject: help - Re: installing FRED on Fedora 9
> To: Petur Kirke <pk(a)simprentis.com>, fred-users(a)lists.nic.cz
> Message-ID: <48FE0C23.4936.1BEC99F(a)paulos.sdnp.org.mw>
> Content-Type: text/plain; charset=US-ASCII
>
>
> This method did not work for me on Fedora8, did you have to install
>
> fred-repo
>
> befor using yum?
>
> Regards,
>
> Paulos
> ======================
> Dr Paulos B Nyirenda
> .mw ccTLD
> http://www.registrar.mw
>
>
> On 16 Oct 2008 at 10:24, Petur Kirke wrote:
>
>>
>> I have installed Fedora 9 on a machine, and then i installed the FRED
>> binary package
>> for Fedora 9 like this:
>>
>> yum install fred-*
>>
>> This installation worked very fine.
>>
>> But where to go from here ?
>>
>> I looked at the Fred website, under "documentation", and "FRED
>> Howto", but it looks like this dokumentation assumes that we use
>> Debian.
>> Where can i see what to do after installing the FRED binary package
>> for Fedora 9 ?
>>
>>
>>
>> Peter
>>
>>
>> This email and its attachments may be confidential and are intended
>> solely for the use of the individual to whom it is addressed.
>> If you are not the intended recipient or authorized to receive
>> information for the intended recipient you are notified that
>> disclosing, copying, distributing or taking any action in reliance on
>> the contents of this information is strictly prohibited. If the email
>> contains proposals, they are valid for 30 days following the date of
>> email transmission. Finally, the recipient should check this email
>> and any attachment for the presence of viruses. The company accepts
>> no liability for any damage caused by any virus transmitted by email.
>>
>
>
>
>
> ------------------------------
>
> Message: 2
> Date: Wed, 22 Oct 2008 08:46:38 +0200
> From: Jarom?r Tal?? <jaromir.talir(a)nic.cz>
> Subject: Re: Thanks, and a question
> To: fred-users(a)lists.nic.cz
> Message-ID: <1224657998.3526.21.camel(a)localhost.localdomain>
> Content-Type: text/plain; charset="utf-8"
>
> Hi Mario,
>
> sorry for my late answer. In our ubuntu packages repository we have
> package fred-server separated into four packages (fred-common,
> fred-rifd, fred-pifd, fred-adifd). All this binary packages are build
> from fred-server source package. Those fred-*ifd packages contain
> servers for registrar interface, public interface and administration
> inteface. We separated them just because different importance of these,
> for example we upgrade and restart administration interface very often
> and on the contrary - registrar interface must be restarted only when we
> inform registrars. This is just our policy.
>
>>From your email it looks like you forgot to sign your eppclient.pem
> certificate with ubuntu CA certificate. Client certificate cannot be
> self signed (of course except of situation when the same certificate is
> configured as CA certificate)
>
> Hope It will help.
>
> Regards,
> Jaromir
>
> On Wed, 2008-09-24 at 12:03 -0600, Mario Guerra wrote:
>> Jatomir and all:
>>
>> Thanks. I've tested the Live CD with the 01/01/2008 date. It works
>> perfectly. The net effect is that it create zones so easily and, at the
>> same time, stores in a database the administrative data using EPP.
>> Moreover it keeps it simple.
>>
>> The disk installation:
>>
>> In our case my approach has been installing the Ubuntu hardy (8.04)
>> .deb packages, fred-*.deb, which install dome dependencies too. I see
>> that there are no .dev for fred-server (including the Python parts), so
>> I installed these by hand (in /usr/.local) . Is that correct?. What
>> about generating .deb packages for these, too?.
>>
>> For installing the certificates I do this:
>>
>> 1. I use the CA included in the ca-certificates Debian package which, in
>> my opinion, is adequate (I don't have to generate a CA certificate
>> myself.
>> 2. For the mod-eppd Apache module, I generate the self-signed
>> certificates using the usual procedures for generating them for
>> encrypted HTML:
>>
>>
>> openssl genrsa -des3 -out eppd.key 4096
>> openssl req -new -key eppd.key -out eppd.csr
>> openssl x509 -req -days 3650 -in eppd.csr -signkey eppd.key -out
>> eppd.crt
>> openssl rsa -in eppd.key -out eppd.key.insecure
>> mv eppd.key eppd.key.secure;mv eppd.key.insecure eppd.key
>> chmod 600 *.key
>> /etc/init.d/apache2 force-reload
>>
>> 3. For the fred-client certificate configuration I rather use a method I
>> prefer, say,, for dovecot SSL configuration:
>>
>> openssl req -new -x509 -nodes -out eppclient.pem -keyout eppclient.pem
>>
>> 4. After generating both certificates I first configure the mod-eppd
>> virtualhost:
>>
>> Listen *:700
>>
>> <VirtualHost *:700>
>>
>> CorbaEnable On
>> CorbaNameservice "localhost"
>> CorbaObject "EPP" "EPP_alias"
>>
>> EPPprotocol On
>> EPPObject "EPP_alias"
>> EPPschema "/usr/share/fred-mod-eppd/schemas/all-1.4.xsd"
>> EPPservername "CR.NIC's EPP server"
>> EPPlog "/var/log/apache2/eppd.log"
>> EPPloglevel error
>> EPPvalidResponse Off
>>
>> SSLEngine off
>> SSLCipherSuite
>> ALL:!ADH:!EXPORT56:RC4+RSA:+HIGH:+MEDIUM:+LOW:+SSLv2:+
>> EXP:+eNULL
>> SSLVerifyClient require
>> SSLCertificateFile /etc/ssl/fred/eppd.crt
>> SSLCertificateKeyFile /etc/ssl/fred/eppd.key
>> SSLCACertificateFile /etc/ssl/certs/ca.pem
>> SSLVerifyDepth 1
>>
>> </VirtualHost>
>>
>> Notice the /etc/ssl/certs/ca.pem CA certificate, which is the standard
>> Ubuntu CA certificate. This should be adequate, because it expires much
>> later.
>>
>> 5. /etc/init.d/apache2 force-reload
>>
>> 6. For the epp-client configuration file I have this in
>> /usr/local/etc/fred/fred-client.conf:
>>
>> [connect]
>> ;; dir=/usr/local/share/fred-client/ssl
>> host = localhost
>> port = 700
>> ssl_cert = /etc/ssl/fred/eppclient.pem
>> ssl_key = /etc/ssl/fred/eppclient.pem
>> username = REG-FRED_A
>> password = passwd
>> username2 = REG-FRED_B
>> password2 = passwd
>>
>> etc.....
>>
>>
>> 7. When I run fred-client I get this:
>>
>> root@mguerra:/etc/fred# fred-client
>> FredClient 1.6.1
>> Type "help", "license" or "credits" for more information.
>>
>> Using configuration from /usr/local/etc/fred/fred-client.conf
>> Connecting to localhost, port 700 ...
>>
>> ERROR: socket.sslerror: (1, 'error:140770FC:SSL
>> routines:SSL23_GET_SERVER_HELLO:unknown protocol') (localhost:700)
>> Certificate not signed by verified certificate authority.
>>
>> The date gives this:
>>
>> mi? sep 24 11:33:57 CST 2008 (mi? means Wednesday).
>>
>> What can be the reason for this?. Should I use other CA certificate?. Or
>> perhaps I should use a certificate in ~/fredclient.pem?.
>>
>> Thank you in advance.
>>
>> Mario
>>
>> _______________________________________________
>> Fred-users mailing list
>> Fred-users(a)lists.nic.cz
>> https://lists.nic.cz/mailman/listinfo/fred-users
>
Hello,
I have now installed FRED using yum on fedora 8, went smoothly, but
now I am getting httpd errors.
I have gone through most of the configuration but I have a problem
confguring httpd/apache. Apache breaks when I put the mod_eppd.so
module in the conf, I start getting the error:
> Permission denied: make_sock: could not bind to address 0.0.0.0:700
> no listening sockets available, shutting down
> Unable to open logs
How do I configure httpd for fred?
I also need pointers on how to generate the certificates for epp.
Thanks in advance.
Regards,
Paulos
======================
Dr Paulos B Nyirenda
.mw ccTLD
http://www.registrar.mw
On 23 Oct 2008 at 22:12, Jaromír Talír wrote:
> Hello,
>
> if you have fedora 8, it should be enough to install Fred by using
> command 'yum install fred-*'. You don't need to compile anything.
> OmniORB package is in dependencies and should be downloaded
> automatically. If you need to build Fred from sources you shoudl install
> omniORB by command 'yum install omniORB*'.
>
> All these example expect you already installed fred-repo package.
>
> Regards,
> Jaromir
Let me present myself or us. We are the cctld Manager for the .fo domain (Faroe Islands), and we are seriously considering using FRED to manage our domains.
We have now succesfully installed FRED. We installed the OS: Fedora 9, and the Fred binary package for Fedora 9. Then we followed the documentation HOWTO, and in the end everything is working succesfully, even if the HOWTO wasnt made for Fedora 9. :)
We now have an Admin Web Interface and a Public Web Interface (whois). But it seems like, there is no WEB interface for the Registrar Interface (client). And in the documentation it says:
FRED provides ... a GUI client (currently at experimental stage only) ...
So our next question is:
At this time (october 2008), does Fred have any WEB interface, where end users can create (or apply for) domains ?
Because in our country we dont use Registrars, we really need one WEB interface for this. How would you recommend us to solve this task ?
Petur Kirke
Web (PHP) Programmer
This email and its attachments may be confidential and are intended solely for the use of the individual to whom it is addressed.
If you are not the intended recipient or authorized to receive information for the intended recipient you are notified that disclosing, copying, distributing or taking any action in reliance on the contents of this information is strictly prohibited. If the email contains proposals, they are valid for 30 days following the date of email transmission. Finally, the recipient should check this email and any attachment for the presence of viruses. The company accepts no liability for any damage caused by any virus transmitted by email.
I read this in the fred-client documentation:
"In this client version, only two languages are available: en - English; cs - Czech."
What about .fo ? How can i implement it in FRED ?
regards
Petur, PHP Programmer, working for nic.fo
This email and its attachments may be confidential and are intended solely for the use of the individual to whom it is addressed.
If you are not the intended recipient or authorized to receive information for the intended recipient you are notified that disclosing, copying, distributing or taking any action in reliance on the contents of this information is strictly prohibited. If the email contains proposals, they are valid for 30 days following the date of email transmission. Finally, the recipient should check this email and any attachment for the presence of viruses. The company accepts no liability for any damage caused by any virus transmitted by email.
In FRED homepage, under Documentation, Fred_client readme (README_EN.txt), it says:
----------
Chapter 6. Integration of client into the PHP code
CAUTION ! The PHP support extension is in a development and testing phase in this version of the client.
The final solution may differ.
The client also contains a sample PHP script, which demonstrates
how to integrate the client into a PHP solution: doc/client_example.php. It is necessary to correctly set the
route to client: $exec_path (unless the client was installed
using the standard procedure). The $php_module_name variable
sets redirection to file and $command_options enable addition of other parameters
when necessary.
----------
But i cannot find the file client_example.php on my server !
Does anyone know why ?
Can someone send me this file ?
This email and its attachments may be confidential and are intended solely for the use of the individual to whom it is addressed.
If you are not the intended recipient or authorized to receive information for the intended recipient you are notified that disclosing, copying, distributing or taking any action in reliance on the contents of this information is strictly prohibited. If the email contains proposals, they are valid for 30 days following the date of email transmission. Finally, the recipient should check this email and any attachment for the presence of viruses. The company accepts no liability for any damage caused by any virus transmitted by email.
Hi,
I have installed Fred with yum install fred-* on a Fedora 8 and
everything seems to have worked correctly.
However, I am a bit stuck with the documentation as to what to do
exactly from there since the docs seems to be using an install on Ubuntu.
Can you please give me some direction from here?
--
Kind regards,
Eddy
I have installed Fedora 9 on a machine, and then i installed the FRED binary package
for Fedora 9 like this:
yum install fred-*
This installation worked very fine.
But where to go from here ?
I looked at the Fred website, under "documentation", and "FRED Howto", but it looks like this dokumentation assumes that we use Debian.
Where can i see what to do after installing the FRED binary package for Fedora 9 ?
Peter
________________________________
This email and its attachments may be confidential and are intended solely for the use of the individual to whom it is addressed.
If you are not the intended recipient or authorized to receive information for the intended recipient you are notified that disclosing, copying, distributing or taking any action in reliance on the contents of this information is strictly prohibited. If the email contains proposals, they are valid for 30 days following the date of email transmission. Finally, the recipient should check this email and any attachment for the presence of viruses. The company accepts no liability for any damage caused by any virus transmitted by email.
I think i know the answer, but just to be sure:
Does FRED contain a payment solution ? Where domain registrars or registrants can make payments to the cctld Manager using creditcard ?
This email and its attachments may be confidential and are intended solely for the use of the individual to whom it is addressed.
If you are not the intended recipient or authorized to receive information for the intended recipient you are notified that disclosing, copying, distributing or taking any action in reliance on the contents of this information is strictly prohibited. If the email contains proposals, they are valid for 30 days following the date of email transmission. Finally, the recipient should check this email and any attachment for the presence of viruses. The company accepts no liability for any damage caused by any virus transmitted by email.
Hi I am looking at using the fred-client to communicate zia EPP with
Ausregistry the AU registrar. I am able to get the client to run so I
am assuming that my config is ok and SSL ket files are correct.
Though when I connect and try to do a simple hello statement I get this error:
registry:/var/www/fred# python2.4 ./fred-client --config ./conf/fred-client.conf
FredClient 1.6.1
Type "help", "license" or "credits" for more information.
Using configuration from ./conf/fred-client.conf
> hello
Used socket type: IPv4.
Socket timeout: 10.0 sec.
Connecting to portal-ote.ausregistry.net.au, port 700 ...
Connection established.
Try to open SSL layer...
ERROR: getaddrinfo() socket.error [-8] Servname not supported for ai_socktype
>
This suggests to me that that the error is from a misconfiguration
hosname but I have checked and this looks fine as i is the one from
our existing EPP solution. What else would cause this error.
I was getting an error about EOF but downloaded the latest version of
the fred-client and now I am getting this error. I am now using
version 1.6.1.
Also my config is as bellow, please note that I have used both the the
hostname and the IP address of the server in the host config value. I
have even tried this with the hostname/ip in parenthesize and no
success there.
My config is as follows:
> registry:/var/www/fred# cat conf/fred-client.conf
[connect]
dir=/var/www/fred/fred/certificates
host = portal-ote.ausregistry.net.au
port = 700
ssl_cert = %(dir)s/CHEAPERDOMAINS-OTE-cert.pem
ssl_key = %(dir)s/CHEAPERDOMAINS-key.pem
username = ***************
password = ***************
;; Every XML namespace can have the version independent to others:
schema_version_contact = 1.2
schema_version_nsset = 1.2
schema_version_domain = 1.2
schema_version_enum = 1.1
schema_version_fred = 1.0
schema_version_epp = 1.0
;; socket timeout in sec. In MS Windows MUST be set to 0.0 (timeout bug)
timeout = 10.0
;; turn off automatic login process after start up
nologin = n
[session]
schema = /var/www/fred/fred/schemas/all-1.4.xsd
;; send "poll ack" right after to "poll req"
poll_autoack = off
;; confirm all editable commands
confirm_send_commands = on
;; enable/disable xmllint
validate = on
;; display colors on tty console
colors = yes
;; set verbose level 1,2,3
verbose = 3
Jatomir and all:
Thanks. I've tested the Live CD with the 01/01/2008 date. It works
perfectly. The net effect is that it create zones so easily and, at the
same time, stores in a database the administrative data using EPP.
Moreover it keeps it simple.
The disk installation:
In our case my approach has been installing the Ubuntu hardy (8.04)
.deb packages, fred-*.deb, which install dome dependencies too. I see
that there are no .dev for fred-server (including the Python parts), so
I installed these by hand (in /usr/.local) . Is that correct?. What
about generating .deb packages for these, too?.
For installing the certificates I do this:
1. I use the CA included in the ca-certificates Debian package which, in
my opinion, is adequate (I don't have to generate a CA certificate myself.
2. For the mod-eppd Apache module, I generate the self-signed
certificates using the usual procedures for generating them for
encrypted HTML:
openssl genrsa -des3 -out eppd.key 4096
openssl req -new -key eppd.key -out eppd.csr
openssl x509 -req -days 3650 -in eppd.csr -signkey eppd.key -out eppd.crt
openssl rsa -in eppd.key -out eppd.key.insecure
mv eppd.key eppd.key.secure;mv eppd.key.insecure eppd.key
chmod 600 *.key
/etc/init.d/apache2 force-reload
3. For the fred-client certificate configuration I rather use a method I
prefer, say,, for dovecot SSL configuration:
openssl req -new -x509 -nodes -out eppclient.pem -keyout eppclient.pem
4. After generating both certificates I first configure the mod-eppd
virtualhost:
Listen *:700
<VirtualHost *:700>
CorbaEnable On
CorbaNameservice "localhost"
CorbaObject "EPP" "EPP_alias"
EPPprotocol On
EPPObject "EPP_alias"
EPPschema "/usr/share/fred-mod-eppd/schemas/all-1.4.xsd"
EPPservername "CR.NIC's EPP server"
EPPlog "/var/log/apache2/eppd.log"
EPPloglevel error
EPPvalidResponse Off
SSLEngine off
SSLCipherSuite
ALL:!ADH:!EXPORT56:RC4+RSA:+HIGH:+MEDIUM:+LOW:+SSLv2:+
EXP:+eNULL
SSLVerifyClient require
SSLCertificateFile /etc/ssl/fred/eppd.crt
SSLCertificateKeyFile /etc/ssl/fred/eppd.key
SSLCACertificateFile /etc/ssl/certs/ca.pem
SSLVerifyDepth 1
</VirtualHost>
Notice the /etc/ssl/certs/ca.pem CA certificate, which is the standard
Ubuntu CA certificate. This should be adequate, because it expires much
later.
5. /etc/init.d/apache2 force-reload
6. For the epp-client configuration file I have this in
/usr/local/etc/fred/fred-client.conf:
[connect]
;; dir=/usr/local/share/fred-client/ssl
host = localhost
port = 700
ssl_cert = /etc/ssl/fred/eppclient.pem
ssl_key = /etc/ssl/fred/eppclient.pem
username = REG-FRED_A
password = passwd
username2 = REG-FRED_B
password2 = passwd
etc.....
7. When I run fred-client I get this:
root@mguerra:/etc/fred# fred-client
FredClient 1.6.1
Type "help", "license" or "credits" for more information.
Using configuration from /usr/local/etc/fred/fred-client.conf
Connecting to localhost, port 700 ...
ERROR: socket.sslerror: (1, 'error:140770FC:SSL
routines:SSL23_GET_SERVER_HELLO:unknown protocol') (localhost:700)
Certificate not signed by verified certificate authority.
The date gives this:
mié sep 24 11:33:57 CST 2008 (mié means Wednesday).
What can be the reason for this?. Should I use other CA certificate?. Or
perhaps I should use a certificate in ~/fredclient.pem?.
Thank you in advance.
Mario
Jaromír Talír,
I would like to request you or .CZ to index the subject line for this
FRED-USERS discussion list with a list identifier so that we can
separate its mail from the rest and hence avoid its mail being caught
up in the spam filter.
You may just use or include something like [FRED-USERS] in the
subject line like most lists now do, like in my subject above.
I like to read mail from this list but it is becoming difficult to
separate its mail from spam, the message below is such an example.
Regards,
Paulos
======================
Dr Paulos B Nyirenda
.mw ccTLD
http://www.registrar.mw
------- Forwarded message follows -------
From: Marc Manthey <marc(a)let.de>
To: fred-users(a)lists.nic.cz
Subject: Re: Payment solution
Date sent: Sun, 19 Oct 2008 19:39:58 +0200
Send reply to: fred-users(a)lists.nic.cz
<mailto:fred-users-request@lists.nic.cz?subject=unsubscribe>
<mailto:fred-users-request@lists.nic.cz?subject=subscribe>
Keywords:
Am 19.10.2008 um 19:23 schrieb Petur Kirke:
>
> Does FRED contain a payment solution ? Where domain registrars or
> registrants can make payments to the cctld Manager using creditcard ?
i think the developerteam would apriciate to implement such a thing
when you pay for it ;)
Question : Would you share it after you pay for it ? ;)
> This email and its attachments may be confidential
????
Marc
_______________________________________________
Fred-users mailing list
Fred-users(a)lists.nic.cz
https://lists.nic.cz/mailman/listinfo/fred-users
------- End of forwarded message -------
Im trying to use yum to install Fred.
At the download page in the Fred homepage, it says, i should first install this package (repository):
http://fred.nic.cz/attachment/wiki/attachments/fred-repo-1.0-1.noarch.rpm?f…
I so did.
According to Freds homepage, then i should be able to run this command:
yum install fred-*
But when i run it, i get this error:
http://archive.nic.cz/yum/fred/5/i386/repodata/repomd.xml: [Errno 14] HTTP Error 404: Not Found
Trying other mirror.
Error: Cannot retrieve repository metadata (repomd.xml) for repository: fred. Please verify its path and try again.
I then checked the url: http://archive.nic.cz/yum/fred/5/i386/repodata/repomd.xml
and it is wrong.
So my question is: How can i use yum to install fred ?
regards
Peter
________________________________
This email and its attachments may be confidential and are intended solely for the use of the individual to whom it is addressed.
If you are not the intended recipient or authorized to receive information for the intended recipient you are notified that disclosing, copying, distributing or taking any action in reliance on the contents of this information is strictly prohibited. If the email contains proposals, they are valid for 30 days following the date of email transmission. Finally, the recipient should check this email and any attachment for the presence of viruses. The company accepts no liability for any damage caused by any virus transmitted by email.
Hello:
I'm working for the NIC in Costa Rica and we consider an excellent
alternative the FRED software made by nic.cz. It's nioe to e-meet you....
We have tested both the Live CD and the Debian/Ubuntu debs on an Ubuntu 8.04
box. For the second, we downloaded the deb packages with apt-get, ussing the
8.04 repository.
In both cases, when executing fred_client we get these results:
-----------------------------------------------------------------
root@nic-laptop:/etc/ssl# /usr/local/bin/fred-client -c /etc/ssl/fred.crt
-k /etc/ssl/fred.key -h localhost
FredClient 1.6.1
Type "help", "license" or "credits" for more information.
Using configuration from /usr/local/etc/fred/fred-client.conf
Connecting to localhost, port 700 ...
ERROR: socket.sslerror: (1, 'error:140770FC:SSL
routines:SSL23_GET_SERVER_HELLO:unknown protocol') (localhost:700)
Certificate not signed by verified certificate authority.
------------------------------------------------------------------
The same happens with the Live CD. Are we overlooking something?.
--
Mario A. Guerra
San José, Costa RIca
