In Faroe Islands we have 2 kinds of domain applications named A applications and B applications.
When the customer makes an A application, the domain is created immediately.
When the customer makes a B application, the domain will be created 1 month after the application is done.
So my question is:
Is it possible to create one domain (incl. contacts, nameservers) in FRED, and make it DISABLED until 1 month is gone ?
Or do i have to save all the information outside of FRED until 1 month is gone, and then create the domain in FRED ?
regards
Petur
This email and its attachments may be confidential and are intended solely for the use of the individual to whom it is addressed.
If you are not the intended recipient or authorized to receive information for the intended recipient you are notified that disclosing, copying, distributing or taking any action in reliance on the contents of this information is strictly prohibited. If the email contains proposals, they are valid for 30 days following the date of email transmission. Finally, the recipient should check this email and any attachment for the presence of viruses. The company accepts no liability for any damage caused by any virus transmitted by email.
Hey Guys,
I have got FRED operating today. However, when I use fred-client and
try and create_contacts I get command failed.
Below is the output;
wogg_85(a)192.168.0.19> create_contact CID:ID02 'Jan Ban' info(a)mail.com
Street Brno 123000 CZ
Do you really want to send this command to the server? (y/N): y
ERROR: Command failed
As this is all very new to me, I am not sure what else I can post. I
followed the instructions at http://fred.nic.cz/wiki/howto to get it
operating. Also the script to load the first zone did not work. This
is becuase the FRED binary is not around, I assume the replacement is
fred-admin, but unsure how it would work.
Any help would be greatly appreciated! Let me know if you need any
more info.
Regards,
Julian
I have tryed the client_example.php script.
Whatever i do, it answeres:
Error:
fred_client not instaled properly. See help or set prefix of path.
As far as i know fred_client is working on the machine as it should.
So i want to ask these questions:
1) What should i write in the $exec_path field ? The path to what ?
2) Where (in which file) do i set the PHP output mode ?
3) My configuration file is in /etc/fred. Should i move it too /etc ?
regards
Petur
This email and its attachments may be confidential and are intended solely for the use of the individual to whom it is addressed.
If you are not the intended recipient or authorized to receive information for the intended recipient you are notified that disclosing, copying, distributing or taking any action in reliance on the contents of this information is strictly prohibited. If the email contains proposals, they are valid for 30 days following the date of email transmission. Finally, the recipient should check this email and any attachment for the presence of viruses. The company accepts no liability for any damage caused by any virus transmitted by email.
Hey,
I was curios how fred handles zone generation automatically. I have
found the command line tool, but I am un-sure if this process is
automated.
--julian
Jaromír Talír,
or anyone else,
Although my httpd was running ok, I am getting the following
httpd error when I try to active the fred-server, could you please
suggest what I can do to resolve it?
[root@ngoli paulos]# /etc/rc.d/init.d/fred-server start
Starting FRED central registry CORBA servers... [ OK ]
[root@ngoli paulos]#
[root@ngoli paulos]# /etc/rc.d/init.d/httpd restart
Stopping httpd: [ OK ]
Starting httpd: (13)Permission denied: make_sock: could not bind to address [::]:700
(13)Permission denied: make_sock: could not bind to address 0.0.0.0:700
no listening sockets available, shutting down
Unable to open logs
[FAILED]
[root@ngoli paulos]#
This happens soon after installing fred-*.
Regards,
Paulos
On 3 Nov 2008 at 17:29, Jaromír Talír wrote:
> Hello Paulos,
>
> Dr Paulos Nyirenda píse v Po 27. 10. 2008 v 10:15 +0200:
> > Hello,
> >
> > Will there be anyone from .CZ at the ICANN Cairo meeting whom I could
> > meet to consult on FRED?
>
> I will not be in Cairo, but our CEO Ondrej Filip is there. I thing he
> can answer some questions about FRED.
>
> > It would really help if I could have a brief technical meeting on
> > FRED.
> > I have installed FRED on fedora8 and I need a few pointer on a few
> > areas including
> > (a) how I could finalise httpd, epp configuartion,
> > (b) how to use it successfully
>
> I don't know how to answer these questions. If you installed all
> components using 'yum install fred-*'. You have to start all servers.
>
> sudo /etc/init.d/postgresql initdb
> sudo /etc/init.d/postgresql start
> sudo /etc/init.d/omniNames start
> sudo /etc/init.d/fred-server start
> sudo /etc/init.d/httpd start
> sudo /etc/init.d/fred-webadmin-server start
>
> Then you can connect to server with:
> /usr/bin/fred-client
>
> > (c) how I could efficiently or quickly import our current .mw ccTLD
> > registry data into FRED
>
> First you will have to configure FRED for .mw. You shoud add your system
> registrar and your zone to FRED and allow this registrar to register
> this zone.
>
> /usr/sbin/fred-admin --zone_add --zone_fqdn=tz
> /usr/sbin/fred-admin --registrar_add --registrar_handle=REG-MW
>
> Now change in /etc/fred/fred-client.conf username from REG-FRED_A to
> REG-MW. You sould be able to connect with this registrar
>
> When we migrated from old system to FRED we used normal fred-client. You
> will have to create commands (create_contact, create_nsset,
> create_domain) that reflect your current database and use fred-client to
> process these commands.
>
> Regards,
> Jaromir
>
Paulos
==============================
Dr Paulos Nyirenda
Malawi SDNP Coodinator
----------------------------------------------------------
Malawi SDNP Webmail: http://www.sdnp.org.mw
Access your Malawi SDNP e-mail from anywhere in the world.
----------------------------------------------------------
Im thinking about, in which order i have to do the fred-client commands.
For example, when i want to run the create_domain command, i think under normal circumstances i first need to run the create_contact command.
And do i need to run check_domain before i run a create_domain command, or does the system check this automatically ?
And when i run delete_domain, does the system check, if i first have to delete one contact, which is only used in this domain ?
Is there any documentation on this subject ?
This email and its attachments may be confidential and are intended solely for the use of the individual to whom it is addressed.
If you are not the intended recipient or authorized to receive information for the intended recipient you are notified that disclosing, copying, distributing or taking any action in reliance on the contents of this information is strictly prohibited. If the email contains proposals, they are valid for 30 days following the date of email transmission. Finally, the recipient should check this email and any attachment for the presence of viruses. The company accepts no liability for any damage caused by any virus transmitted by email.
The FRED homepage now (2008.11.05 03:23 CET) shows this error:
Trac Error
TracError: The Trac Environment needs to be upgraded.
Run "trac-admin /var/trac/fred upgrade"
This email and its attachments may be confidential and are intended solely for the use of the individual to whom it is addressed.
If you are not the intended recipient or authorized to receive information for the intended recipient you are notified that disclosing, copying, distributing or taking any action in reliance on the contents of this information is strictly prohibited. If the email contains proposals, they are valid for 30 days following the date of email transmission. Finally, the recipient should check this email and any attachment for the presence of viruses. The company accepts no liability for any damage caused by any virus transmitted by email.
I have created one domain name with fred-client: NIC.FO
When i use the check_domain command (in Fred client) i get the answer, that this domain is created.
But when i look in the postgreSQL database, i cant find the domain name NIC.FO ?
It is not in the DOMAIN table, and not in the ZONE table.
In which table are the domain names stored ?
peter
________________________________
This email and its attachments may be confidential and are intended solely for the use of the individual to whom it is addressed.
If you are not the intended recipient or authorized to receive information for the intended recipient you are notified that disclosing, copying, distributing or taking any action in reliance on the contents of this information is strictly prohibited. If the email contains proposals, they are valid for 30 days following the date of email transmission. Finally, the recipient should check this email and any attachment for the presence of viruses. The company accepts no liability for any damage caused by any virus transmitted by email.
hi
im trying to get .fo domains into fred.
i first did this:
/usr/sbin/fred-admin --zone_add --zone_fqdn=fo
/usr/sbin/fred-admin --registrar_add --registrar_handle=REG-TLD
/usr/sbin/fred-admin --registrar_add_zone --zone_fqdn=fo --registrar_handle=REG-TLD
then i try to run this command in fred-client:
REG-TLD@localhost> create_domain nic.fo cid:REG-TLD
Do you really want to send this command to the server? (y/N): y
ERROR: Server returned an empty message.
Ending session at localhost
Disconnected.
Try to automaticly reconnect - send login.
Connecting to localhost, port 700 ...
Connected!
ERROR: Parameter value syntax error
Reason: contact handle of registrant does not exist.
What am i doing wrong ?
________________________________________
Fra: fred-users-bounces(a)lists.nic.cz [fred-users-bounces(a)lists.nic.cz] På vegne af Jaromír Talíř [jaromir.talir(a)nic.cz]
Sendt: 4. november 2008 13:50
Til: fred-users(a)lists.nic.cz
Emne: Re: SV: Fred dramas
You can use this commands which do almost the same:
/usr/sbin/fred-admin --zone_add --zone_fqdn=tld
/usr/sbin/fred-admin --registrar_add --registrar_handle=REG-TLD
/usr/sbin/fred-admin --registrar_add_zone --zone_fqdn=tld
--registrar_handle=REG-TLD
This will create new registrar as copy of REG-FRED_A, new zone as copy
of .cz and allow new registrar to register new zone.
Jaromir
Julian De Marchi píše v Út 04. 11. 2008 v 21:10 +1000:
> Jaromír Talíř wrote:
> > Yes, this is unimplemented section. We think once there will be some
> > registry statistics for internal usage, but there are no plans yet.
> > Currently our development in web administration interface (daphne) is
> > concentrated on Users, User profiles, Authorization and Auditing. I
> > expect next release in about month.
>
> One last question before I call it a night. On your site you have;
>
> #!/bin/bash
> ZONE=change_me
> PRIMARY=primary.ns.change_me
> HOSTMASTER=hostmaster.change_me
> fred -U fred fred << _EOF_
> INSERT INTO zone
> (fqdn,ex_period_min,ex_period_max,val_period,dots_max)
> VALUES('${ZONE}', 12, 12, 0, 1);
> INSERT INTO zone_soa (Zone, TTL, Hostmaster, Serial, Refresh,
> Update_retr, Expiry, Minimum, ns_fqdn) VALUES (curval('zone_id_seq'),
> 18000, '${HOSTMASTER}', NULL, 10600, 3600, 1209600, 7200, '${PRIMARY}');
> INSERT INTO zone_ns (Zone, fqdn, addrs) VALUES (curval('zone_id_seq'),
> '${PRIMARY}', '{}');
> INSERT INTO registrarinvoice (registrarid,zone,fromdate) VALUES
> (currval('registrar_id_seq'),curval('zone_id_seq'),NOW());
> _EOF_
>
>
> To create the first zone. How would one do this in the current version?
>
> --julian
>
> _______________________________________________
> Fred-users mailing list
> Fred-users(a)lists.nic.cz
> https://lists.nic.cz/mailman/listinfo/fred-users
This email and its attachments may be confidential and are intended solely for the use of the individual to whom it is addressed.
If you are not the intended recipient or authorized to receive information for the intended recipient you are notified that disclosing, copying, distributing or taking any action in reliance on the contents of this information is strictly prohibited. If the email contains proposals, they are valid for 30 days following the date of email transmission. Finally, the recipient should check this email and any attachment for the presence of viruses. The company accepts no liability for any damage caused by any virus transmitted by email.
Dear Jaromir.
thanks for ur support, I run the* yum install boost-devel *and run the
./fred-manager start and got the following message:
*# ./fred-manager start
Starting PostgreSQL [FAILED]
mkdir: cannot create directory `/root/root/nofred/omniNames/': No such
file or directory
Cannot open error log file: /root/root/nofred/omniNames.log
usage: omniNames [-start [<port>]]
[-logdir <directory name>]
[-nohostname]
[-errlog <file name>]
[-ignoreport]
[<omniORB-options>...]
Use -start option to start omniNames for the first time.
With no <port> argument, the standard default of 2809 is used.
Use -logdir option to specify the directory where the log/data files are
kept.
Use -nohostname to suppress the inclusion of the hostname in the log files.
Use -errlog option to specify where standard error output is redirected.
Use -ignoreport option to ignore the port specification when determining
the end points to listen on, using -ORBendPoint arguments instead.
You can also set the environment variable OMNINAMES_LOGDIR to specify the
directory where the log/data files are kept.
Starting omniNames... [ OK ]
./fred-manager: line 550: /root/root/etc/init.d/fred-server: No such file or
directory
Starting Apache... [FAILED]
./fred-manager: line 552: /root/root/etc/init.d/fred-webadmin-server: No
such file or directory
#*
*I checked the httpd, omniNames and postgres services status and found them
running.
Thank again for your support.*
On Wed, Oct 22, 2008 at 9:57 AM, Jaromir Talir via RT <fred(a)nic.cz> wrote:
> Hello,
>
> you have to install boost libraries:
>
> yum install boost-devel
>
> hope it will help.
>
> If you will have another questions, you can use our list
> https://lists.nic.cz/mailman/listinfo/fred-users
> There is an archive of emails where you can find some valuable
> informations.
>
> Regards,
> Jaromir
>
--
Edouard M.
rw ccTLD Administrator
Mob: 250 08352776
250 05129000
