27 Kvě
2013
27 Kvě
'13
8:27
Hello Samer
If you're certain that FRED is started and Apache module for EPP is working as well,
then you should
configure registrar accounts (with login, password and SSL key). Then you should use them
in
fred-client. (As written before, AFAIR.)
To see more detailed info about actions taken by fred-client and possible failure reason,
you can
run it with -v3. (Or something like that, fred-client --help will tell you more.)
Best
Piotr
On 2013-05-26 23:23, samer khalil wrote:
hi again,
i've done as you said but when i run fred-client i get an authentication error
allthough i'm putting
the right username and passwd in fred-client.conf
root@nic0:~# fred-client -f /etc/fred/fred-client.conf
Czech translation not available
FredClient upstream/2.6.0.rc1-92-g7aa8
Type "help", "license" or "credits" for more information.
Using configuration from /etc/fred/fred-client.conf
Connecting to localhost, port 700 ...
ERROR: Login failed.
here's my fred-client.conf:
;; Example of configuration file.
;; Modify line with schema=... and dir=... set real path of your files.
;; and save into /etc/fred/fred-client.conf or ~/.fred-client.conf
;; EXPLANATION: Double semicolon (;;) means comment. Single semicolon (;) means disabled
value.
[connect]
dir=/usr/share/fred-client/ssl
host = localhost
port = 700
ssl_cert = %(dir)s/test-cert.pem
ssl_key = %(dir)s/test-key.pem
#username = REG-FRED_A
#password = passwd
#username2 = REG-FRED_B
#password2 = passwd
username = NIC-REG1
password = passwd
;; Every XML namespace can have the version independent to others:
;schema_version_contact = 1.4
;schema_version_nsset = 1.2
;schema_version_domain = 1.3
;schema_version_enum = 1.1
;schema_version_fred = 1.2
;schema_version_epp = 1.0
;; socket timeout in sec. In MS Windows MUST be set to 0.0 (timeout bug)
timeout = 10.0
;; Force socket type. Valid value is: IPv4 or IPv6.
;; Default is to use server's socket type.
;socket = IPv6
;; turn off automatic login process after start up
;nologin = y
[session]
schema=/usr/share/fred-client/schemas/all.xsd
;; send "poll ack" right after to "poll req"
poll_autoack = off
;; confirm all editable commands
confirm_send_commands = on
;; enable/disable xmllint
validate = on
;; display colors on tty console
colors = on
;; if your input is escaped ('<example&test>'), set this
value on
escaped_input = on
;; set verbose level 1,2,3
verbose = 1
;; if lang is not set, it used value from os.environ.LANG
;; lang = cs
lang = en
;; substitution of NULL value
;null_value = None
;; substitution of SKIP value
;skip_value = None
;; cltrID - client transaction ID for all communication
;; Symbol %d is replaced by number of the command.
;; Value 04 between % and d pads all numbers to four digits (leading zero).
; cltrid = myid%04d
;; Reconnect automaticly if connection fell down (default yes)
; reconnect = no
what could it be?
thanks,
Samer
On Sun, May 12, 2013 at 12:08 AM, Mario Guerra <mguerra(a)nic.cr
<mailto:mguerra@nic.cr>> wrote:
On Sat, 11 May 2013 21:59:39 +0300
samer khalil <samerk1(a)gmail.com <mailto:samerk1@gmail.com>> wrote:
hi Mario,
I was able to initiate the db and add a registrar with a zone as u
suggested. i used:
fred-admin --registrar_add --handle=NIC-REG1 --country=LB --no_vat
fred-admin --zone_add --zone_fqdn=test.lb <http://test.lb> --ex_period_min=1
--ex_period_max=241 --hostmaster=samerk1.gmail.com <http://samerk1.gmail.com>
--ns_fqdn=nic0.net.lb--refresh=1800
fred-admin --zone_ns_add --zone_fqdn=test.lb <http://test.lb>
--ns_fqdn=nic0.net.lb--addr=147.28.0.44
Now what's next? I am looking for a good documentation for
Fred Administration and user guide. Do you have any to share?
thanks,
Same
Almost done. Associate the zone with the registrar:
registrar_add_zone options:
--registrar_add_zone add access right for registrar to zone
--zone_fqdn arg zone fqdn
--handle arg registrar handle
--from_date arg from date (default today)
--to_date arg to date (default not filled)
Like:
fred-admin --registrar_add_zone --zone_fqdn test.lb <http://test.lb> --handle
NIC-REG1
After that, you are supposed to use fred-client.
On Thu, May 9, 2013 at 1:07 AM, Mario Guerra <mguerra(a)nic.cr
<mailto:mguerra@nic.cr>> wrote:
> On Wed, 8 May 2013 23:51:50 +0300
> samer khalil <samerk1(a)gmail.com <mailto:samerk1@gmail.com>> wrote:
>
> > Hi,
> > I am new to this list and would like to install a test environment of
> Fred
> > and eventually have it operational for our TLD registry in Lebanon (.LB).
> > I am seeking your assistance and guidance in order to proceed with the
> > installation.
> > I am working on ubuntu 12 and so far i have installed the following fred
> > packages:
> >
> > ii fred-adifd 2.13.5~rc1-1~precise+1
> > FRED Administration Interface Daemon
> > ii fred-client 2.6.0~rc1-1ubuntu3~precise+1
> > FRED client for registrars, text interface
> > ii fred-client-qt4 2.6.0~rc1-1ubuntu3~precise+1
> > FRED client for registrars, GUI interface
> > ii fred-common 2.14.0~rc7-1~precise+1
> > FRED common files
> > ii fred-db 2.13.0~rc3-1~precise+1
> > DB schema and example data for FRED
> > ii fred-doc2pdf 2.5.1~rc1-2ubuntu2~precise+1
> > PDF generator for FRED registry system
> > ii fred-idl 2.14.0~rc1-1~precise+1
> > IDL files for FRED
> > ii fred-logd 2.13.5~rc1-1~precise+1
> > FRED logging daemon
> > ii fred-mifd 2.13.5~rc1-1~precise+1
> > FRED backend for MojeID
> > ii fred-msgd 2.13.5~rc1-1~precise+1
> > FRED messaging daemon
> > ii fred-pifd 2.13.5~rc1-1~precise+1
> > FRED Public Interface Daemon
> > ii fred-pyfred 2.4.2~rc2-1~precise+1
> > FRED Support Daemons
> > ii fred-pylogger 1.2.0~rc1-1ubuntu1~precise+1
> > Python wrapper for logging to FRED logger
> > ii fred-rifd 2.13.5~rc1-1~precise+1
> > FRED Registrar Interface Daemon
> > ii fred-stats 1.2.2~rc1-1~precise+1
> > FRED is complete central domain registry
> > ii fred-transproc 1.2.0-1~precise+1
> > FRED support for importing bank statements
> > ii fred-webadmin 3.10.0~rc1-1ubuntu4~precise+1
> > www administration interface for FRED
> > ii fred-whois 2.11.0-1ubuntu1~precise+1
> > Web Whois interface for FRED registry system
> > ii nagios-pyfred-genzone-plugin 2.4.2~rc2-1~precise+1
> > Nagios plugin to FRED Zone Generator
> > ii pyfred-filemanager 2.4.2~rc2-1~precise+1
> > FRED File Manager Client
> > ii pyfred-genzone 2.4.2~rc2-1~precise+1
> > FRED Zone Generator Client
> >
> > Apache, postgres, python, corba are installed as well.
> > I loaded the sql database from /usr/share/fred-db/structure.sql
> >
> > I am stuck at this level and would appreciate your help to proceed.
> >
> > Regards,
> > Samer
>
> Hello, Samer:
>
> Run:
>
> su - postgres
> /usr/sbin/fred-dbmanager install
> exit
>
> This setup the database "fred" and the tables. After that, add a
> registrar, then add one or more zones and associate them with the registrar.
>
> Best regards.
>
> --
> Mario Guerra <mguerra(a)nic.cr <mailto:mguerra@nic.cr>>
> _______________________________________________
> fred-users mailing list
> fred-users(a)lists.nic.cz <mailto:fred-users@lists.nic.cz>
> https://lists.nic.cz/cgi-bin/mailman/listinfo/fred-users
>
--
Mario Guerra <mguerra(a)nic.cr <mailto:mguerra@nic.cr>>
_______________________________________________
fred-users mailing list
fred-users(a)lists.nic.cz <mailto:fred-users@lists.nic.cz>
https://lists.nic.cz/cgi-bin/mailman/listinfo/fred-users
_______________________________________________
fred-users mailing list
fred-users(a)lists.nic.cz
https://lists.nic.cz/cgi-bin/mailman/listinfo/fred-users