On Mon, May 27, 2013 at 10:46 AM, Jiri Sadek <jiri.sadek@nic.cz> wrote:

Hi,

as you are using test certificate
(/usr/share/fred-client/ssl/test-cert.key) make sure you have correct
md5 fingerprint in database for your registrar:

openssl x509 -noout -fingerprint -md5 -in /usr/share/fred-client/ssl/test-cert.pem
(MD5 Fingerprint=39:D1:0C:CA:05:3A:CC:C0:0B:EC:6F:3F:81:0D:C7:9E)

SELECT cert, password FROM registraracl WHERE registrarid = (SELECT id FROM registrar WHERE handle = 'NIC-REG1');

You can change it directly in database or by web (daphne) interface.

Best regards.
Jiri

--
Jiri Sadek
CZ.NIC, z.s.p.o.
Americka 23
120 00 Praha 2

On Mon, 2013-05-27 at 00:23 +0300, samer khalil wrote:
> hi again,
> i've done as you said but when i run fred-client i get an
> authentication error allthough i'm putting the right username and
> passwd in fred-client.conf
>
>
> root@nic0:~# fred-client -f /etc/fred/fred-client.conf
> Czech translation not available
> FredClient upstream/2.6.0.rc1-92-g7aa8
> Type "help", "license" or "credits" for more information.
>
>
> Using configuration from /etc/fred/fred-client.conf
> Connecting to localhost, port 700 ...
> ERROR: Login failed.
>
>
> here's my fred-client.conf:
>
>
> ;; Example of configuration file.
> ;; Modify line with schema=... and dir=... set real path of your
> files.
> ;; and save into /etc/fred/fred-client.conf or ~/.fred-client.conf
> ;; EXPLANATION: Double semicolon (;;) means comment. Single semicolon
> (;) means disabled value.
>
>
> [connect]
> dir=/usr/share/fred-client/ssl
> host = localhost
> port = 700
> ssl_cert = %(dir)s/test-cert.pem
> ssl_key = %(dir)s/test-key.pem
> #username = REG-FRED_A
> #password = passwd
> #username2 = REG-FRED_B
> #password2 = passwd
> username = NIC-REG1
> password = passwd
>
>
> ;; Every XML namespace can have the version independent to others:
> ;schema_version_contact = 1.4
> ;schema_version_nsset = 1.2
> ;schema_version_domain = 1.3
> ;schema_version_enum = 1.1
> ;schema_version_fred = 1.2
> ;schema_version_epp = 1.0
>
>
> ;; socket timeout in sec. In MS Windows MUST be set to 0.0 (timeout
> bug)
> timeout = 10.0
>
>
> ;; Force socket type. Valid value is: IPv4 or IPv6.
> ;; Default is to use server's socket type.
> ;socket = IPv6
>
>
> ;; turn off automatic login process after start up
> ;nologin = y
>
>
> [session]
> schema=/usr/share/fred-client/schemas/all.xsd
>
>
> ;; send "poll ack" right after to "poll req"
> poll_autoack = off
>
>
> ;; confirm all editable commands
> confirm_send_commands = on
>
>
> ;; enable/disable xmllint
> validate = on
>
>
> ;; display colors on tty console
> colors = on
>
>
> ;; if your input is escaped ('<example&test>'), set this
> value on
> escaped_input = on
>
>
> ;; set verbose level 1,2,3
> verbose = 1
>
>
> ;; if lang is not set, it used value from os.environ.LANG
> ;; lang = cs
> lang = en
>
>
> ;; substitution of NULL value
> ;null_value = None
>
>
> ;; substitution of SKIP value
> ;skip_value = None
>
>
> ;; cltrID - client transaction ID for all communication
> ;; Symbol %d is replaced by number of the command.
> ;; Value 04 between % and d pads all numbers to four digits (leading
> zero).
> ; cltrid = myid%04d
>
>
> ;; Reconnect automaticly if connection fell down (default yes)
> ; reconnect = no
>
>
> what could it be?
>
>
> thanks,
> Samer
>
>
> On Sun, May 12, 2013 at 12:08 AM, Mario Guerra <mguerra@nic.cr> wrote:
> On Sat, 11 May 2013 21:59:39 +0300
> samer khalil <samerk1@gmail.com> wrote:
>
> > hi Mario,
> >
> > I was able to initiate the db and add a registrar with a
> zone as u
> > suggested. i used:
> >
> > fred-admin --registrar_add --handle=NIC-REG1 --country=LB
> --no_vat
> > fred-admin --zone_add --zone_fqdn=test.lb
> --ex_period_min=1
> > --ex_period_max=241 --hostmaster=samerk1.gmail.com
> > --ns_fqdn=nic0.net.lb--refresh=1800
> > fred-admin --zone_ns_add --zone_fqdn=test.lb
> > --ns_fqdn=nic0.net.lb--addr=147.28.0.44
> >
> > Now what's next? I am looking for a good documentation for
> > Fred Administration and user guide. Do you have any to
> share?
> >
> > thanks,
> > Same
> >
> >
>
>
> Almost done. Associate the zone with the registrar:
>
> registrar_add_zone options:
> --registrar_add_zone add access right for registrar to zone
> --zone_fqdn arg zone fqdn
> --handle arg registrar handle
> --from_date arg from date (default today)
> --to_date arg to date (default not filled)
>
> Like:
>
> fred-admin --registrar_add_zone --zone_fqdn test.lb --handle
> NIC-REG1
>
> After that, you are supposed to use fred-client.
>
>
> >
> > On Thu, May 9, 2013 at 1:07 AM, Mario Guerra
> <mguerra@nic.cr> wrote:
> >
> > > On Wed, 8 May 2013 23:51:50 +0300
> > > samer khalil <samerk1@gmail.com> wrote:
> > >
> > > > Hi,
> > > > I am new to this list and would like to install a test
> environment of
> > > Fred
> > > > and eventually have it operational for our TLD registry
> in Lebanon (.LB).
> > > > I am seeking your assistance and guidance in order to
> proceed with the
> > > > installation.
> > > > I am working on ubuntu 12 and so far i have installed
> the following fred
> > > > packages:
> > > >
> > > > ii fred-adifd
> 2.13.5~rc1-1~precise+1
> > > > FRED Administration Interface Daemon
> > > > ii fred-client
> 2.6.0~rc1-1ubuntu3~precise+1
> > > > FRED client for registrars, text interface
> > > > ii fred-client-qt4
> 2.6.0~rc1-1ubuntu3~precise+1
> > > > FRED client for registrars, GUI interface
> > > > ii fred-common
> 2.14.0~rc7-1~precise+1
> > > > FRED common files
> > > > ii fred-db
> 2.13.0~rc3-1~precise+1
> > > > DB schema and example data for FRED
> > > > ii fred-doc2pdf
> 2.5.1~rc1-2ubuntu2~precise+1
> > > > PDF generator for FRED registry system
> > > > ii fred-idl
> 2.14.0~rc1-1~precise+1
> > > > IDL files for FRED
> > > > ii fred-logd
> 2.13.5~rc1-1~precise+1
> > > > FRED logging daemon
> > > > ii fred-mifd
> 2.13.5~rc1-1~precise+1
> > > > FRED backend for MojeID
> > > > ii fred-msgd
> 2.13.5~rc1-1~precise+1
> > > > FRED messaging daemon
> > > > ii fred-pifd
> 2.13.5~rc1-1~precise+1
> > > > FRED Public Interface Daemon
> > > > ii fred-pyfred
> 2.4.2~rc2-1~precise+1
> > > > FRED Support Daemons
> > > > ii fred-pylogger
> 1.2.0~rc1-1ubuntu1~precise+1
> > > > Python wrapper for logging to FRED logger
> > > > ii fred-rifd
> 2.13.5~rc1-1~precise+1
> > > > FRED Registrar Interface Daemon
> > > > ii fred-stats
> 1.2.2~rc1-1~precise+1
> > > > FRED is complete central domain registry
> > > > ii fred-transproc 1.2.0-1~precise+1
> > > > FRED support for importing bank statements
> > > > ii fred-webadmin
> 3.10.0~rc1-1ubuntu4~precise+1
> > > > www administration interface for FRED
> > > > ii fred-whois
> 2.11.0-1ubuntu1~precise+1
> > > > Web Whois interface for FRED registry system
> > > > ii nagios-pyfred-genzone-plugin
> 2.4.2~rc2-1~precise+1
> > > > Nagios plugin to FRED Zone Generator
> > > > ii pyfred-filemanager
> 2.4.2~rc2-1~precise+1
> > > > FRED File Manager Client
> > > > ii pyfred-genzone
> 2.4.2~rc2-1~precise+1
> > > > FRED Zone Generator Client
> > > >
> > > > Apache, postgres, python, corba are installed as well.
> > > > I loaded the sql database
> from /usr/share/fred-db/structure.sql
> > > >
> > > > I am stuck at this level and would appreciate your help
> to proceed.
> > > >
> > > > Regards,
> > > > Samer
> > >
> > > Hello, Samer:
> > >
> > > Run:
> > >
> > > su - postgres
> > > /usr/sbin/fred-dbmanager install
> > > exit
> > >
> > > This setup the database "fred" and the tables. After that,
> add a
> > > registrar, then add one or more zones and associate them
> with the registrar.
> > >
> > > Best regards.
> > >
> > > --
> > > Mario Guerra <mguerra@nic.cr>
> > > _______________________________________________
> > > fred-users mailing list
> > > fred-users@lists.nic.cz
> > > https://lists.nic.cz/cgi-bin/mailman/listinfo/fred-users
> > >
>
>
> --
> Mario Guerra <mguerra@nic.cr>
> _______________________________________________
> fred-users mailing list
> fred-users@lists.nic.cz
> https://lists.nic.cz/cgi-bin/mailman/listinfo/fred-users
>
>
>
> _______________________________________________
> fred-users mailing list
> fred-users@lists.nic.cz
> https://lists.nic.cz/cgi-bin/mailman/listinfo/fred-users

_______________________________________________
fred-users mailing list
fred-users@lists.nic.cz
https://lists.nic.cz/cgi-bin/mailman/listinfo/fred-users